search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
NUCLEAR POWER


NUCLEAR CRANES PROJECT Reliable brakes specifi ed for nuclear plant’s spent fuel crane T


he removal and disposal of spent fuel rods from a nuclear reactor is an extremely precise and controlled process. Used fuel rods are placed at the bottom of a spent fuel pond to begin a process of cooling that will last for years. T e highly specialised overhead gantry crane used to transport and position the fuel rods must off er complete reliability. For a recently commissioned crane in the Czech Republic, the OEM chose to specify the NFF series of compact electromagnetic brakes from Stromag. Every 12 to 24 months, up to one third of the total fuel load of a nuclear reactor is removed from the core. T e spent fuel rods, fresh from the core, will be generating immense amounts of heat and radiation that must be controlled and contained locally, prior to being moved into dry casks for fi nal disposal. T e spent fuel pond is typically at least 12m deep, with temperatures carefully managed to remain below 50°C. T e pools contain boric acid for its neutron-absorbing capability, which reduces the ionising radiation emanating from the rods and helps to ensure subcriticality. When one of Europe’s leading manufacturers of nuclear reactors and related equipment was asked to design a new overhead gantry crane to move spent fuel rods into the pond, it knew that only the most reliable components could be specifi ed. T e gantry is used irregularly, often with many days between each operation. As such, critical components such as the motors, winch and brakes must be suited to periods of inactivity without servicing or maintenance. T e holding brakes on the winch and the trolley drives are particularly


RELIABLE BRAKING


T e NFF series of double-face, spring- applied brakes was designed to provide reliable braking for applications that are exposed to harsh environments. T e double- face design facilitates high braking forces with a compact footprint, which is ideal for crane applications where space is limited. All of the steel components on the brake feature special nitrocarburated and postoxidated surfaces to provide protection against humidity, dust and corrosive materials. For this particular application, the brakes


The Stromag NFF series of double-face, spring-applied brakes


important, as they would only be used in the event of a power failure, at which point they would be required to perform holding duties. Kay Wendelberger, customer care engineer for Stromag, comments: “Having worked with the manufacturer previously, we were aware of the application demands of such an environment. In addition to requiring a braking system that would operate reliably despite infrequent use, the manufacturer was looking for a compact solution that would provide protection against dust and humidity. T e spring- loaded electromagnetic NFF series provided all the required functionality, including IP66 protection and specialised surface treatment for long term reliability in even the harshest environments.”


were required to perform holding duties in the event of a power failure aff ecting the gantry crane. T e crane’s twin trolley drives required multiple NFF 4 brakes with a torque rating of 44Nm. A single NFF 400 brake was fi tted to the winch drive with a torque rating of 4,400Nm. T e spring- applied, electromagnetic brakes are held open while power is supplied to the brake, allowing the crane’s drive system and winch to manage speed and positioning. In the event of a power failure, the brake closes automatically, holding the crane in position while any necessary maintenance or repair work is carried out. Kay concludes: “T e NFF series is designed to be directly mounted onto the motor’s shaft with no brake disassembly required. T is ensures fast installation and minimises the footprint of the application. Our engineers worked closely with the OEM to ensure the models we supplied were best suited to the application and that installation and commissioning occurred without any problems. T e gantry crane is now in operation at the nuclear plant and we are working with the manufacturer on other similar projects.”


A European manufacturer of nuclear reactors needed reliablebraking systems for use on a new crane at a power plant


48 www.engineerlive.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52