Pattern Forming Rolling Mill


Dimensions: • 200mm wide rollers • Overall size; 280 x 140 x 30mm (width x height x depth)


£129.95 Ref: R46145


• A microfold brake rolling mill • Creates a corrugated shape for sheet metal and wire


• With thin sheet metals (36 gauge to 30 gauge) you can expect up to 8 microfolds per inch • Rollers are hardened and anodised • Can be screwed to work bench (screws not supplied) • Includes calibrated discs to precisely set the roller gap • Full instructions included (also available via the “documents available to download” icon above) • It is not recommended to corrugate metals thicker than 0.51mm unless thin strips are being used • For thicker pieces of metal it is recommended to anneal and then corrugate a second time


Mini Rolling Mill with 7 Rolls


Our 7 in 1 Mini Rolling Mill (7 roll model, not 5). Receive extra with this model and at a unbeatable price it’s remarkable value and an outstanding build.


Included roll types and sizes: • 2 x Sheet, 75mm • 1 x “V” groove, 5 to 8mm • 1 x half round, 1 to 4mm • 1 x Twin pattern, diagonal crossing & chequer effect, each 37.5mm wide


• 1 x Twin pattern, straight line & barking effect, each 37.5mm wide • 1 x combination “V”, 8 to 5mm & half round 1 x 2mm and 1 x 2mm • Gear ratio: Direct drive


• ”V” grooves (x30) • Half Round grooves (x17) • Roll your wire/sheets in various formations: flat, half round and “V” shape • Two twin pattern rollers included with fine diagonal crossing, checker, straight line, pattern, and barking effect • Top/bottom easy roller changing process, no gear extractors involved all you need is a spanner Cousins ref S33520


£155.00 Ref: R34923


FAVOURITE


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16