Maximum benefits from MAXX
New underground structure’s with Mapei
With the new additions to the MAXX family, Delta Membrane Systems offer a range of products that bring to the market the most secure basement pumping systems for type C (cavity drain) waterproofing. Specifically designed for the basement waterproof- ing industry, MAXX technology takes an ‘intelligent’ approach in the design of the product range, resulting in optimum functionality, high levels of efficiency and ease of installation and service. All of the models are ideally
suited to the range of pumps offered by Delta Membrane Systems, making the company a ‘one stop shop’ for pumping packages.
01992 523523
www.deltamembranes.com Enq. 167
Mapei is pleased to announce the launch of Mapeproof HW. Based on natural sodium bentonite Mapeproof HW is a high performance water- proofing membrane, ideal for waterproofing concrete structures below ground level. Mapeproof HW consists of 5.5kg/m2
of natural sodium
bentonite encapsulated between two-geotextiles secured with a special needle-punched system. The upper layer is a non-woven polypropylene fabric and the lower is woven fabric. Bentonite is a natural clay mineral which swells in contact with water absorbing around 60 per cent of its own mass. Once swollen, the bentonite membrane forms a dense mono- lithic material creating an effective seal. This new product is a highly effec- tive and simple waterproofing solution and is also a ‘green waterproofing product ’ is not only eco-friendly as it contains no solvents or VOCs but is also not dependent on oil as a raw material. Mapeproof HW is used as part of a waterproofing system using Idrostop B25, Mapeproof Seal, Mapeproof Mastic and Mapeproof CD fixing washes. Mapeproof HW is suitable for protecting structures against ingress of ground water.
0121 508 6970
www.mapei.co.uk Enq. 166 Waterproofing simplified with Remmers
Remmers Multi-Tight 2K is a new, flex- ible, mineral based waterproofing product which has all the performance properties of older technology polymer- modified thick bitumen emulsions, while being “bitumen free”. Using unique rubber granulate filler technol- ogy Multi-Tight 2K has a crack-bridg- ing capacity which is five times more effective than standard flexible mineral- based waterproofing systems. Multi Tight 2K is UV stable but can also be over-coated with Remmers Concrete
Acrylic in any colour, allowing clients to aesthetically blend in areas of water- proofing on building facades. Waterproofing your building has now been truly simplified by Multi Tight 2K.
Enq. 168
0800 849 6339
www.qualitydecking.co.uk Enq. 169 Enq. 170
64
selfbuilder & homemaker
www.sbhonline.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68