RHODIUM Rhodium Diamond Bright Plating Solution, Concentrate
The super bright white reflective surface complements brilliant faceted stones on diamond ring settings. Rhodium is a very hard-wearing corrosion/tarnish resistant solution and so is used universally across the world.
• Ultra bright coatings with previously unattained lightness and brilliance
• Good covering speed • Layer thickness up to 5 micrometre can be deposited • Provides a highly scratch resistant coat on jewellery • Plates on all carats of gold, platinum and silver • Very economical solution for finishing • Plate around a thousand ring mount heads depending on the size and surface area • Achieve two-tone effects by lacquering part of the piece before plating. The lacquered surface will not be plated and can be removed afterwards by lacquer remover
£99.95 Ref: C43268
• Steam clean your surface before plating to get super bright white finish • Remember the higher the quality of finish and cleanness of the piece improves the quality of the plate • It is necessary to use De-Mineralised Water (C4359) • Two part mix, 2 bottles of 100ml • 2g of Rhodium per 100ml
Improved Formula
MICROPLATING Machine Electroplating modular system, designed to electroplate gold, rhodium, silver, nickel and copper in the workshop.
Plating: • Bath 1 – Electrolytic Salts (C4907), for cleaning prior to plating
• Bath 2 – Gilding Salts, 9ct, 18ct, 22ct, 24ct, Rose & Silver. (See Plating Chemicals)
• Bath 3 – Rhodium (C5620) This bath contains the platinized Titanium Anode for Rhodium Plating
Plating unit can also be used for Anti-tarnishing: • Bath 1 – De-tarn Cleaning Salts (C8207) • Bath 2 –Silverbrite Salts (C8206)
Dimensions (approx.): • 420 x 180 x 340mm • 3 x 1 litre beakers (Ø130mm x 120mm)
£595.00 Ref: P4898
Tel: +44 (0) 1708 757800
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16