Polishers
SILICONE PUMICE
• Soft material, adapts to the work surface • Easier to handle • Provides an all over even finish
Stages:
For use on any jewellery already containing set pre- cious, non precious & synthetic stones. The special composition of these polishers ensure no damage to the stone, as well as providing a light buffer.
PUMICE STAGE 2 - HONEY METAL PRE-POLISHING & SMOOTHING POLISHERS FOR JEWELLERY CONTAINING STONES Features:
• Grit: Medium • Colour: Honey
• Composition: Silicone • Recommended RPM: 7000 to 10,000 (Max 20,000 RPM) • Ø2.35mm shank
Size Ref
(1) Ø12 x 2mm .....P42361 ....55p (1) Ø22 x 3mm .....P42362 ....55p (2) Ø15 x 2.5mm ..P42363 ....55p (2) Ø22 x 4mm .....P42364 ....55p
PUMICE STAGE 3 - GREY FINAL FINISH, HIGH LUSTRE POLISHERS FOR JEWELLERY CONTAINING STONES Features:
• Grit: Fine • Colour: Grey
• Composition: Silicone • Recommended RPM: 7000 to 10,000 (Max 20,000 RPM) • Ø2.35mm shank
Size Ref
(1) Ø12 x 2mm .....P42368 ....55p (1) Ø22 x 3mm .....P42369 ....55p (2) Ø15 x 2.5mm ..P42370 ....55p (2) Ø22 x 4mm .....P42371 ....55p
Tel: +44 (0) 1708 757800 Size Ref
(3) Ø5 x 16mm .....P42372 ....85p (4) Ø14.5 x 2mm ..P42373 ....95p (5) Ø14.5 x 2mm ..P42374 ....95p
Size Ref
(3) Ø5 x 16mm .....P42365 ....85p (4) Ø14.5 x 2mm ..P42366 ....95p (5) Ø14.5 x 2mm ..P42367 ....95p
• Stage 1: Coarse Reducing • Stage 2: Pre-Polish & Smoothing • Stage 3: Finial Finish
(including matt & satin finish) • Stage 4: Super High Lustre Finish
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16