January - February 2016 Wire Rope Exchange

EQUIPMENT–HOISTS WRE CATALOG Equipment - General

SIZE QTY. DESCRIPTION

1000 FT 3/8 TRANSPORT CHAIN SYSTEM 7. 1 FOOT INCREMENTS. WORKING LOAD LIMIT 6600. NOT FOR OVERHEAD LIFTING.

500 3 1 dr

300 1

2 X 27'RATCHET STRAP WITH FLAT HOOKS/STD.WIDE HANDLE WORKING LOAD LIMIT 3335LBS.

115 Volt Power Team Electric Pump

5/16" x 550' G4 ISO windlass chain ACCO USA

1/2" - 5/8" Ratchet binders

Wireless Load Cell *New* 5 Tonne - 11,000 Lbs. Complete with handheld device, aluminum carrying case, and the calibration certificate.

1 set 1 set 1 set 1 set

1 set 1 set 1 1 1

1

1 1 1

10

Aluminum Dies - Straight Through - Code 7

Aluminum Dies - Straight Through - Code 16

Aluminum Dies - Straight Through - Code 18

Aluminum Dies - Straight Through - Code 20

Aluminum Dies - Tapered - Code 13 Aluminum Dies - Tapered - Code 18 Round Sling Fabrication Equipment Round Sling Fabrication Equipment

Piab Digital Crane Scale *New* 2,000 Kg Capacity. Model: DKV102

Tube Contraction Machine - Automatically prepares Round Sling Covers

Round Sling Fabrication Equipment Roundsling Machine Round sling machine

Push / Pull Poles are designed to help facilitate hands-free lifting. They are a modified aluminum telescopic boat hook with a rubber buffer at the other end. The hook end can be used at full extension (approximately 7ft / 2.1m) to retrieve tag lines hanging vertically without a load handler having to go too close to a suspended load. The rubber buffer is used to push against suspended loads to guide them, especially when landing loads in tight or congested spaces. Once again, this allows the operator to remain a safe distance from the load until it has landed. The poles would normally be fully retracted (for rigidity) during this type of use where their length is 4ft / 1.2m. However, they can be used half-extended if required but if too much pressure is applied, they will telescope in.

1 5 Ton Coffing Chain Hoist In perfect

working order. Customer to disassemble and remove. Sold as is, no returns. Will- ing to take best offer.

1 Huskie Tools REC-S524H Hydraulic

Cutting Tool 8 Ton Battery Powered Hydraulic Cutting Tool Can Cut the following: Wire Rope - 7/8" Rebar (SC 40) - 5/8" Rebar (SC-60) - 1/2" Ground Rod - 5/8" ACSR - 477 MCM Guy Wire - 5/8" Guy Wire (EHS) - 7/16"

Comes

with Case, two batteries (14.4 V) 3.0 Amp Li-Ion & Charger

1 1

Kone Crane 5 Ton Hoist Model CXT 400 Sold As Is. No returns or refunds. Will- ing to negotiate price.

Tempest "S" Series Motor Blower Model DC15MB50X Cyclone System For Dust Collection

Equipment - Swager SIZE

QTY. 1

1 1 1 DESCRIPTION

WIRE ROPE SWAGER- 1967 LAUFFER 630 TON SWAGE MACHINE. SELLING AS IS. NEEDS LOVE.

500 Ton Esco Press. Call for more details: 713.641.1552

800 Ton Esco Press, pictured. Please call for pricing and more information.

1500 National Press, Call with inquiries: (713) 641-1552

48 JANUARY-FEBRUARY 2016 PRICE LISTER ZONE $10,000.00 245 NJ Call: 713.641.1552 Call for PRICE 287 TX $200,000 287 TX

11 2 3

WIRE ROPE EXCHANGE 287 TX SIZE

QTY. 9

4 3 DESCRIPTION

300A, 1-1/2-TON, LITTLE MULE LINES- MAN HOIST

8tonx10ft Lift C.M. cyclone hand chain hoist 646

Harrington LB015-20, 1-1/2 Ton Ratchet Lever Hoist W 20' Lift

HFS 3/4 Ton Lever Chain Hoist 20' HFS 1 Ton Lever Chain Hoist 20' HFS 1 1/2 Ton Lever Hoist 20'

$15,000 OBO 667 IL $500.00 OBO 667 IL 770 7,225 500 $2,504.00 667 IL

PRICE 3.5

LISTER ZONE 539 IL

SIZE

QTY. 1

1 15 539 IL

$1,500.00 539 IL $2.45/ft

1 541 FL

$17.00/ea 541 FL 2,404.84

588 CAN SIZE 335.91 488.59 540.27 927.86

608.39 770.47

588 CAN 588 CAN 588 CAN 588 CAN

588 CAN 588 CAN

84,995.00 588 CAN 59.995.00 588 CAN 3,079.90

588 CAN 19,995.00 588 CAN

114,995.00 588 CAN 74,499.00 588 CAN 74,499.00 588 CAN $150.00 each 659 TX

QTY. DESCRIPTION

14,000 EYE NUTS 5/8 20

4,000 4,000 500 105 180 800 20

24 1000 SIZE

QTY. 104

351 17 6 30 2000 291

1200 1800 244 70 96 12

$10,000 OBO 667 IL

200 100 61 55 8

23

154 44 11 18

#11B 2.1/4" RH Tap 1.1/2" Bail SC Eye Nut

#1 Eye Nut Forging, Galvanized #5 Eye Nut Forging, Galvanized #6 Eye Nut Forging, SC #10 Eye Nut Forging, SC #11 Eye Nut Forging, SC

#2 SS T316 Forged Eye Nut Blank

#11C 2.1/2" RH Tap 1.1/2" Bail SC Eye Nut

DESCRIPTION

1,000 TON NATIONAL SWAGING MA- CHINE W/DYES

350 Tonne Swager. Refurbished. Universal die pocket rotates 360? and accepts both One PressÂ® and National type dies.

385 Ton Swager. Refurbished. Universal die pocket rotates 360 degrees and accepts both One PressÂ® and National type dies.

Eye Nuts

PRICE 1.25 $48

.24/ea

1.40/ea 2.30/ea 7.15/ea 19.9

$2.75 $48

#11 2" RH Tap 1.1/2" Bail SC Eye Nut $42 EYE NUT- 5/8" S.S. T316 (180-9080Z) 4.2 Eyebolts

DESCRIPTION

5/16 x 2 1/4 Regular Galvanized Eyebolt - Import

3/8 x 4 1/2 Regular Galvanized Eyebolt - COOPER

1/2 x 1 1/2 Regular Galvanized Eyebolt - COOPER

1 1/2 x 15 Galvanized Shoulder Eyebolt - Import

1 1/2 x 15 Galvanized Shoulder Eyebolt- CROSBY

36500035 1/2 X 3 GALV REG WITH NUT

PRICE 0.35

$2.60 $2.90 $56.00 $98.60 0.6

36500041 5/16 x 4-1/4 S/S Shoulder 2 1/4" x 4" Shoulder Nut Eye Bolt Taiwan $1.05 1/4" x 4" SS 316 Shoulder Eye Bolt 1/4 x 4 Shoulder Nut

5/16 x 2-1/2 Shoulder Nut 3/8 x 2-1/2 Shoulder Nut 1/4 x 4 Regular Nut

5/16 x 2-1/2 Regular Nut 5/16 x 4-1/2 Regular Nut 3/8 x 6 Regular Nut 1/2 x 2 Regular Nut 5/8 x 8 Regular Nut 5/8 x 10 Regular Nut 3/4 x 4-1/2 Regular Nut 3/4 x 6 Regular Nut 1 x 6 Regular Nut

1-1/4" MACHINE EYE BOLT, IMPORT VISIT WWW.WIREROPEXCHANGE.COM

FOR ADDITIONAL PRODUCT LISTINGS OR FOR FULL DESCRIPTION 1.87

3/8" x 8" Galv Reg. Nut Eyebolt-Imp (1043349202)

3/8"- 16unc X 4" ZP Closed & Welded Eye Bolt -Chicago Hardware 4" threads 5" overall shank length (1043333WFW)

7/8" X 12" GALVANIZED REGULAR NUT EYE BOLTS- CHINA ORIGIN

Hoists

PRICE 225

2015 Call 310 151.2

161.46 186.46

LISTER ZONE 94 UT

100 IL 187 CA

336 IL 336 IL 336 IL

LISTER'S INDEX ON PAGE 69. VISIT WWW.WIREROPEEXCHANGE.COM FOR ADDITIONAL PRODUCT LISTINGS AND FULL PRODUCT DESCRIPTIONS. 0.45 139 139 PA PA $4.00 EACH 245 NJ

$2.50 0.37 0.4

1.32 0.58 0.3

0.35 1.01 0.53 2.22 1.69 2.28 2.88 7.8 9

LISTER ZONE 7

TN 50 TX

50 TX 50 TX 50 TX 50 TX 50 TX 50 TX 50 TX

50 TX 377 TX

LISTER ZONE 7

TN 7 7 7 7 TN TN TN TN 35 MD

35 MD 50 TX 50 TX 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 86 KY 94 UT

Equipment - Swager PRICE LISTER ZONE $90,000 OBO 420 FL 34,995.00 588 CAN

34,995.00 588 CAN

Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14 | Page 15 | Page 16 | Page 17 | Page 18 | Page 19 | Page 20 | Page 21 | Page 22 | Page 23 | Page 24 | Page 25 | Page 26 | Page 27 | Page 28 | Page 29 | Page 30 | Page 31 | Page 32 | Page 33 | Page 34 | Page 35 | Page 36 | Page 37 | Page 38 | Page 39 | Page 40 | Page 41 | Page 42 | Page 43 | Page 44 | Page 45 | Page 46 | Page 47 | Page 48 | Page 49 | Page 50 | Page 51 | Page 52 | Page 53 | Page 54 | Page 55 | Page 56 | Page 57 | Page 58 | Page 59 | Page 60 | Page 61 | Page 62 | Page 63 | Page 64 | Page 65 | Page 66 | Page 67 | Page 68 | Page 69 | Page 70 | Page 71 | Page 72 | Page 73 | Page 74 | Page 75 | Page 76 | Page 77 | Page 78 | Page 79 | Page 80 | Page 81 | Page 82 | Page 83 | Page 84