NEW 2015 Kit contains:


• 20 mandrels, from Ø2.5 to Ø12mm (sizes carved on wooden base)


• Rotation stand and lever (2 screws supplied to hold firmly on wooden base)


• Spring loaded coil holder


• Protective hand piece collar (for no.30 hand piece)


• Saw cutter blade


• Attachment for saw cutter blade


• Supplied on wooden base with labelled compartments


Jump Ring Maker


£150.00 Ref: J39047


Exceptional Value How to use:


1. Place the preferred mandrel size into the chuck and tighten, locking the mandrel in place ready to make your coil of wire.


2. Keeping the wire pulled tight, use the handle to rotate the mandrel creating a tight coil of wire around your mandrel.


3. Remove the coil from the mandrel and place in the coil holder, twisting the nuts to press the sprung loaded top down, holding your now coiled wire firmly in place.


4. Insert your number 30 hand piece into the protective collar. Then attach the circular saw blade using the cutter holder attachment provided.


5. Lubricate the saw blade using our burr cut lube (B4181) 6. Cut along the slit, cutting your coil into your simple and easy to make jump rings


NEW 2015


Great Tool


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16