INDUSTRY NEWS
Innovative concept for the hot forming of press-hardened components for the automobile industry
concept for the hot forming of press-hardened components. At the heart of a press line is Siempelkamp‘s innovative analysis of process requirements, a new machine concept was developed for the hot forming of press-hardened components. The homogeneous pressure distribution ensures higher quality, and an increased output quantity of press- hardened parts. Furthermore, the press concept is characterized by increased process reliability hydraulic drive system which was specially tailored to the press- hardening process.
D
From the blank loader to the feeding of the furnace, and the automation of the downstream processes, press lines are fully automated. Further, the Siempelkamp subsidiary Strothmann, a market-leading company for material handling systems based on linear axes technology, and with more than for hot forming facilities, supplies
uring EuroBLECH 2014 in Hannover, Germany, Siempelkamp will present its innovative
the complete component handling system.
Siempelkamp also provides the suitable machine technology for other plate forming processes: Siempelkamp side member presses can be designed as a single- purpose press for the production of side members, multipurpose press for the manufacture of side members, cross members, bumpers and cabin parts or as a universal member press. Our presses incorporate the complete material handling system and increase production outputs through long tool life. These presses provide excellent automatic ram parallelism control during high eccentric loads, as well as optimal shock-absorbing properties during blanking. Siempelkamp‘s heavy plate blanking presses allow the synchronized forming of plates production of high-quality chassis, auto body parts and add-on parts for commercial vehicles such as cross members, gusset plates and material handling systems made by Strothmann, these presses
the manufacture of high-quality automobile parts. Siempelkamp’s heavy plate blanking presses are equipped with inclined position monitoring, an eightfold moving beam guiding system, a tool variable ram locking. The belt conveyor is integrated into the systems ensure short cycle times.
14 IMT August/September 2014
www.internationalmetaltube.com
Furthermore, these press systems are equipped with hydraulic blanking stroke limitation with active cutting impact dampening.
More information on Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG t: +49.2151.92- 4636 f: +49.2151.92-5683 www.
siempelkamp.com ralf.griesche@
siempelkamp.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32