LASER BED ALIGNMENT


1. Place the alignment plate in the top left corner of the laser bed


2. Run this file


3. Measure the offset between the box you lasered, and the box that was already lasered.


4. Turn the laser off, then back on.


5. As soon as the word "Gravograph" appears on the display, press and hold the X button. 6. Select the option "ReAlign Machine" 7. Select the option (ReAlign X Y)


8. Increase or decrease the X and Y values by the offset you measured.


9. Press the check button, it will beep if the new values are accepted.


TROUBLESHOOTING If your machine will not allow the offset you need to enter, you’ll need to reset your fence.


In the package of tools that arrived with the machine, there will be an allen wrench that will fit the screws along the rulers on the X and Y axis.


Move the rulers as far in as possible. Run your red light along each axis to ensure the rulers are secured straight.


ZZLAP Laser Alignment


Plate (X00-506-82)


CATALOG


Looking for a great tool to assist in personalization product sales? Look no further than our personalized product catalog. Easily order additional copies for distribution using the SKU/barcode below.


PG514 Catalog (X00-106-82)


GRAB IT, Engrave It & GO


123


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132