This page contains a Flash digital edition of a book.
TOOLS


exceptional quality matched with a high quality nish.


Quick guide for using punches and dies.


Punches should be stored in dry areas to avoid rusting and pitting, also use WD40 lubricant (code C32757) to maintain longevity.


Annealing: The process of heating and cooling metal to make it softer/pliable so it will be easier to work with. The required temperature for annealing, the duration of heating and the rate of cooling vary according to the metal used. When you heat the metal ensure red cherry colour is achieved. Let the item naturally cool down rather than immersing the item in water immediately. Put on a metal planishing (P5202) block to help cool quicker. Wait for the red cherry colour to disappear then place in cold water. If the heated metal is submerged too quickly in water the piece may become distorted; however metal becomes hard when subjected to mechanical working. This effect is called ‘work hardening’; as soon as the metal becomes difcult to move, reanneal it. Annealing will not damage the metal, but trying to bend workhardened metal may cause it to crack or buckle.


ere are some annealing temperatures and guidelines.


 Fine gold annealing not required  8ct yellow and red gold anneals at 650C while white anneals at 750C


 4ct yellow and red gold anneals at 650C while white anneals at 750C


 ct gold anneals at 650C  Sterling Silver anneals between 600650C  Platinum anneals between 00000C  Copper anneals at 650 C  Brass anneals at between 600650 C  ickel Silver (German silver) anneals at 650680C


 Aluminium anneals at 300350C


Which punch and die combinations? The thickness of the sheet determines the punch and dies size to be used to shape sheet metal. For thin gauge metals a punch and die with similar diameters works better together for a close t.


For doming, cut the desired shape out of the sheet metal and anneal it. Using a dapping punch and die to rstly press the sheet into a large, shallow die, then into deeper dies, annealing as needed. As you work the entire surface, the metal will take on a curve. Don’t try to complete the dome in one step unless you need a very shallow curvature. Practice on scrap metal to develop this practice.


  Holes, ange from mm to mm


imensions:  13 x 6 x mm  eigt 14Kg


Code D34918 Description 27 Hole, Dapping Block, Indian Dapping Cubes, Brass


UOM Price EACH


£17.95 Dapping Cubes - Wooden


Dapping Blocks, Steel


34   omes  1cm suare in teel  ange 4mm to mm omes  Indian


439  18 omes  cm suare in teel  ange 4mm to 4mm omes  Italian


Code


D19982 D4239


D35074 Description UOM Price


50mm, 18 Domed Cube, Indian EACH 50mm, 18 Domed Cube, Italian EACH 100mm, 25 Domed Cube, Indian EACH


£18.95 £62.05 £44.95


 apping / oming Cubes  Brass  ulti iameter Holes


Code


D36261 D36262 D19983 D4240


Description UOM Price


30mm, 60 Domed Cube, Indian EACH 40mm, 64 Domed Cube, Indian EACH 50mm, 64 Domed Cube, Indian EACH 50mm, 64 Domed Cube, UK


Dapping Cubes, Bronze


 Cube mm  4 omes , 4, , 6mm    grooves: 6 x 1mm & 6 x 1mm   ectangluar grooves: 3 x 14mm & 3 x 11mm   Half round grooves, idts: , , 8, 9, 1 & 1mm  eigt gms


Code D31266 Description UOM Price Wooden Forming / Dapping Cube EACH


Dapping Disc - Steel, Rubber Mounted


£11.95


£7.95 £8.95


EACH


£10.95 £35.95


 apping / oming Cube  Brone  ulit iameter Holes


Code D36263 Description UOM Price 50mm, 60 Domed Block, Indian EACH Dapping Cubes, Steel £19.95


 An excellent set ic includes 11 round dapping oles as ell as 9 forming grooves on top of a tic vulcanised rubber rm base ic absorbs te soc


1998  18 omes  mm suare in teel  ange 4mm to 4mm omes  Indian


 Allos you to ammer itout creating excess noise or vibration at your benc


Hole diameters: 


730


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191  |  Page 192  |  Page 193  |  Page 194  |  Page 195  |  Page 196  |  Page 197  |  Page 198  |  Page 199  |  Page 200  |  Page 201  |  Page 202  |  Page 203  |  Page 204  |  Page 205  |  Page 206  |  Page 207  |  Page 208  |  Page 209  |  Page 210  |  Page 211  |  Page 212  |  Page 213  |  Page 214  |  Page 215  |  Page 216  |  Page 217  |  Page 218  |  Page 219  |  Page 220  |  Page 221  |  Page 222  |  Page 223  |  Page 224  |  Page 225  |  Page 226  |  Page 227  |  Page 228  |  Page 229  |  Page 230  |  Page 231  |  Page 232  |  Page 233  |  Page 234  |  Page 235  |  Page 236  |  Page 237  |  Page 238  |  Page 239  |  Page 240  |  Page 241  |  Page 242  |  Page 243  |  Page 244  |  Page 245  |  Page 246  |  Page 247  |  Page 248  |  Page 249  |  Page 250  |  Page 251  |  Page 252  |  Page 253  |  Page 254  |  Page 255  |  Page 256  |  Page 257  |  Page 258  |  Page 259  |  Page 260  |  Page 261  |  Page 262  |  Page 263  |  Page 264  |  Page 265  |  Page 266  |  Page 267  |  Page 268  |  Page 269  |  Page 270  |  Page 271  |  Page 272  |  Page 273  |  Page 274  |  Page 275  |  Page 276  |  Page 277  |  Page 278  |  Page 279  |  Page 280  |  Page 281  |  Page 282  |  Page 283  |  Page 284  |  Page 285  |  Page 286  |  Page 287