Post Supports & Accessories PowaPost® Concrete In Shoe


Designed for use when soil conditions are unsuitable for Drive-In Spikes. Installation


Simply set the shoe into a 450mm cube of concrete so that the base plate sits on the surface, checking alignment during installation. The post should only be inserted once the concrete has cured.


Code PS2/75 PS2/100


Timber Size 75x75mm


100x100mm PowaPost® Post Extender


The PowaPost® Post Extender is a single piece welded box section that enables easy extension of any 75 or 100mm timber post, allowing easy addition of decorative panels and trellis.


Installation PowaPost® Repair Spike


The PowaPost® Repair Spike is a sturdy welded shoe which provides an easy solution to broken or rotted timber posts that have been previously set into concrete. Perfect for repairing storm damaged fencing, the Repair Spike is installed quickly, eliminating the need to remove the existing concrete and without the need for digging or additional concreting.


Installation


Saw off the old timber post at ground level and hammer the PowaPost® Repair Spike fully down, in between the corner of the timber and the existing concrete, using a PowaPost® Driving Tool to aid insertion and protect the metal shoe. If the concrete is not sound enough to secure the spike, it will be necessary to re-fit the post in an alternative position using the PowaPost® DPS Fence Spike. Once the Repair spike is secured in position attach either the old post if usable, or a new fence post.


Code RS/75


RS/100


Timber Size 75x75mm


100x100mm


Pack Qty 6


6 * Also available in Hot Dipped Galvanised finish, order code G/RS/size.


The EasyGrip design allows quick and easy fixing without the need for any additional fixings. Simply drive the Post Extender onto the top of the existing post using the PowaPost® Driving Tool to avoid damage to the metal sleeve. Location tabs inside the component help provide accurate positioning. Once secured, drive the new timber post into the top of the Post Extender and use PowaPost® Panel Clips to secure trellis or decorative panels.


Code


PEX/75 PEX/100


Timber Size 75x75mm


100x100mm


Also available in Hot Dipped Galvanised finish, order code G/PEX/size


PowaPost® Post Support


Heavy duty welded bracket, designed to be set into concrete. To secure garden sleepers, posts for gazebos, carports and shelters. Not suitable for fencing.


Code PS3


Timber Size 75x75mm


Pack Qty 12


Pack Qty 6 6


Pack Qty 6 6


To order or find out more


CALL 01924 364 794 or scan the QR code.


PowaPost® Post Supports & Accessories 5


NEW


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12