fire testing technology limited Services


Electrical Power  Control Box  Fan


 Scissor Lift Table


Extraction System


230 VAC at 50/60 Hz 6 Amp


Test 2: Consult FTT for details Test 3: 3PH 380-480 VAC at 50/60 Hz 16 Amp Test 4: 230 VAC at 50/60 Hz 6 Amp


Test 3: 230 VAC at 50/60 Hz 13 Amp


Test 1 & 2: Suitable extraction system is required, consult FTT for details.


Test 3 & 4: An exhaust system of 3.5 m3/sec with a duct diameter of 400mm and adjustable flow is recommended.


 Hood Size (recommended)


Gas Supply


Test 3: 3m ×8m, stainless steel Test 4: 3m ×3m, stainless steel


Test 2, 3 & 4: Commercial propane 95% minimum purity is used to supply the four radiant panels.


Test 3 & 4: The required supply pressure is 3-4 bar (43.5 - 58 psi) with a suitable pressure regulator.


Compressed Air Supply


Test 2: Suitable air supply is required, consult FTT for details.


Test 3 & 4: The air supply is used to supply the four radiant panels. The required supply pressure is 6-7 bar (87-101 psi) with a suitable pressure regulator.


Water Supply


Water at 15-25° meters.


C is required for cooling the heat flux


A pressure of approximately 2.4 bar (35 psi) is recommended at a low flow rate 200-300 ml/min.


Interface Cables Brand


Please refer to instrument instruction manual for detailed requirement.


FTT do not supply any brands, please refer to standard ENV 1187 for detailed requirement.


Charlwoods Road East Grinstead West Sussex RH19 2HL United Kingdom Tel: +44 (0) 1342 323600 Fax: +44 (0) 1342 323608 Email: sales@fire-testing.com Web: www.fire-testing.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6