FTT ConeCalc Software – it is available in multi-languages including English, French, German, Spanish and
Japanese.The user interface is a Microsoft Windows based system with “user friendly” push button actions and standard Windows data entry fields, drop down selectors, check boxes and switches capable of:-
Showing the status of the instrument
Calibrating the instrument and storage of calibration results Collecting data generated during a test Calculating the required parameters
Presenting the results in a manner approved by the Standards Averaging of multiple tests
Exporting data to CSV (comma separated variable) files for quick transfer to spreadsheets.
Options
Carbon Dioxide and Carbon Monoxide - NDIR gas analysers.
Protection Screens - to protect the operator from smoke generated by hazardous samples, allow natural test area ventilation and providing a draught free environment for the sample.
Controlled Atmosphere Attachment - for testing specimens in low oxygen atmospheres (0-21%) that may be found in well developed fires, or for studying the effects of gaseous suppressants or other dynamic controlled atmosphere
environments.The cone assembly is located on top of the enclosure with exhaust gas exiting only through the
cone.The cabinet replaces the conventional cone assembly but uses the same controllers as the normal cone
operation.There is a door on the front of the assembly with a viewing window. Changing between the standard fire model and this unit is very simple and takes approximately 10
minutes.The Cone Calorimeter is fitted with a gas mixing attachment to mix air and nitrogen which can be supplied at flows between 0 - 200 l/min to the
chamber.The gas supply lines are fitted with flow meters and flowstat flow controllers and a mixing
chamber.These are external to the enclosure chamber and housed on the main Cone Calorimeter chassis.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12