Bench Polishing Motor with Tapered Spindles
• 1/6 HP High Torque Motor • 125 Watts (continuous rating) • 5/16" Diameter Motor Shaft • Ball Bearing • 500-7,000 RPM • CSA Certified
• CE Rated (230 volt only) • One Year Warranty • Weight: 7.5lbs (3.4kg)
• Width: 13" (330mm) between spindles • Height Overall: 5 1/8" (130mm)
• Height of spindle centre from table surface: 3 3/4" (95mm)
Powerful variable speed bench polishing motor in a compact size suitable for use at the workbench. Its permanent magnet motor is extremely quiet and smooth running with all the power and speed required for a variety of polishing and buffing jobs. Cast iron base has suction cup feet for a secure hold on the work surface. The polishing motor comes with the TM-5 (left hand) and TM-6 (right hand) tapered spindles for holding buffs and brushes up to 4" (100mm) in diameter. Other polishing motor accessories are available separately.
£124.95 BL2CE
An ideal unit for the independent watchmaker or small service centre. Dry running, self-lubricating rotating valves, no maintenance required. Motor with integrated ventilator. Carrying handle. Replaceable filter. Models available with separate foot switches for either one or two users. Two users can work up to a distance of five metres apart. One user model supplied complete with vacuum pencil, white bristle brush and bench support. On-off pedal switch.
Foredom Flexi Shaft ‘Flexade’
Convert your polishing motor into a flex shaft machine with a 30" long Flexade with a standard sheath. Any “QD” style handpiece can be attached. Motor coupling size 5/16".
£17.95 FD516
Foredom Tapered Spindle, L&R
Tapered spindles left and right hand side for 5/16" shaft. For left and right hand mounting of buffs and wheels up to 4" diameter.
L-FDTM5 R-FDTM6 £7.95 Foredom Wheel Mandrel, Left & Right
Wheel mandrels left and right hand side for 5/16" shaft. Hold rubber bonded abrasive wheels, grinding stones, sanding drums, brushes and other accessories with 1/4" centre mounting holes up to 3/4" thick.
L-FDWM5 R-FDWM6 £10.95 Foredom 3 Jaw Chuck
• For Polishing Machine BL2CE • Arbor adjusts to hold accessories with shank from 0–5/32" • Chuck Arbor
• Right side for 5/16" shaft. • Comes with chuck key. • For use only on right hand side.
£28.95 FDJCA2
Foredom Plastic Spindle Adapter, R&L
Plastic spindles for right and left hand mounting of buffs and wheels up to 4” diameter with 3/8” arbor hole. Also ideal for radial bristle discs.
R-FD4561 L-FD4562 £1.50
Foredom Wheel Hub Adapter For Tapered Spindles
For left and right hand mounting of wheels with 1" arbor hole. Use on BL2CE polishing motor spindles and standard tapered spindles.
£3.50 FD4568
Foredom Dust Collector Hood
Hoods are made of heavy gauge sheet metal construction with non-skid pads on the bottom. Has 2 1/2" (64mm) adapter that fits most collection system hoses. 6 1/2" (165mm) high, 4 5/8" (117mm) wide, and 8 5/8" (219mm) deep.
£32.95 FDDCH1
Foredom Collet Holder With 3 Collets
• For polishing machine BL2CE • Collet holder with 3 collets • Right side for 5/16" shaft
• Collet holder on arbor comes with 3/32", 1/8" and 1/4" collets, allen key, and pin and wrench for mounting various size shank mandrels, sanding drums, etc.
• For use only on right hand side.
£18.95 FDCHA5
114 Holes, 3 Tier Burr Stand
• Rotating Stand • Holds 114 Burrs • Centre Part 3" x 2 3/4" to hold tools
£12.50 B19400
• Etic 350.800 swiss.
To repair defective circuits. Micro-tip for precision application. Easy to use.
£31.45 C12025
Plastic Plier Stand
• Very handy for organizing pliers on work bench • Hold upto 12 pliers • White Plastic • Length 230mm • Width 100mm • Height 130mm
£8.95 P19162
• Suction debit: 1.2 cubic metres / hour • Vacuum up to 150 mbar • Size: 100x170x165mm (WxDxH) • Weight: 4.300 kg
Etic Conductive Pen
£595.00 E19466
Dust Remover For Work Bench
72
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104