COMPONENTS Single Edge Track - Undrilled


DualVee Size


T1 T2 T3 T4


Values are in inches


Part Numbering T_-XX


TS_-XX


T_-SS-XX TS_-SS-XX


Examples T1-1


TS2-SS-12 Width W


.437 .625 .875


1.062 Height H


.187 .250 .343 .437


Mounting Shoulder Location


MDT .125 .187 .250 .312


Mounting Shoulder to Center Line


MSC .031 .031 .062 .093


Mounting Shoulder Depth


MSD .062 .094 .109 .125


Weight


(lbs./ft) .183 .343 .690


1.100


AISI 1045 carbon steel running surface hardened to a minimum of Rc 53, polished and oiled AISI 1045 carbon steel running surface unhardened (Rc 22-25), as formed, oiled AISI 420 stainless steel running surface hardened to a minimum of Rc 40, polished and oiled AISI 420 stainless steel running surface unhardened (Rc 20-22), as formed, oiled


The underscore must be filled in with the appropriate DualVee track size (1, 2, 3, or 4) XX = length in foot increments (1 to 20 feet hardened or 1 to 22 feet unhardened)


represents a size 1 track, carbon steel, hardened, 1 foot length represents a size 2 track, stainless steel, unhardened, 12 foot length


Single Edge Track Features ƒ Easy installation


ƒ Available from stock ƒ Mounting shoulder allows for accurate positioning of vee ways ƒ Available “as formed,” or induction hardened and polished


ƒ Induction hardened track remains soft below the mounting shoulder, allowing for drilling or other machining


ƒ Available in either AISI 1045 carbon steel or 420 stainless steel


ƒ Can be easily butt-joined for stroke lengths exceeding maximum single piece lengths (20 feet hardened, 22 feet unhardened)


ƒ Available coating/plating options include black oxide, thin dense chrome, and nickel.


ƒ Non-standard hole patterns can be accommodated. Non-standard track options are quoted upon request.


ƒ Optional ground track Ra 0.2 to 0.4µm (N4-N5 finish) to enhance corrosion resistance of stainless steel track is also available. Please contact customer service for lead time.


MSC CL H W MSD 90º MDT


VIRTUAL APEX


Notes 1. The overall length tolerance is ±1/16 inch. 2. For non-standard track lengths or other non-standard options, contact Bishop-Wisecarver for quotation.


18 © Bishop-Wisecarver Corporation 2011. All rights reserved www.bwc.com 888.580.8272


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32