Accuride Ball Bearing Slides
Explanation of terms
Load rating
Load ratings relate to the maximum permissible load for a pair of side mounted slides
installed 450mm apart. Ratings are based on moderate use up to 10,000 cycles.
The measurements are taken between, and at the midpoint of the drawer member and are
given in kg.
Extension
75% extension - drawer opens approximately 75% of the total slide length.
100% extension - drawer opens the same amount as the slide length.
100%+ extension - over-travel is achieved. The drawer opens in excess of the slide length.
Side space
The amount of room necessary to accommodate the thickness of the slide assembly. For optimum
performance, allow between +0.2mm and +0.5mm over the nominal slide thickness, e.g. for a
12.7mm slide, the side space allowance should be between 12.9 and 13.2mm.
Disconnect
Allows simple connect/disconnect from the slide assembly.
Locks
A lever must be actuated to move the slide.
Lock-in - secures the slide in the closed position.
Lock-out - secures the slide in the opened position to prevent unwanted movement while
accessing or servicing the components in their enclosure.
Hold-in/hold-out
Holds the slide open or closed until extra force is applied.
Self close
A spring attachment designed to close the slide and prevent bounce back.
Cam drawer adjust
Allows minute adjustment to the drawer front for easy alignment. Standard feature on
2132 and 3832 series slides.
Shock blocks
These are hardened steel pins that provide an interference fit between the slide members to
minimise the amplification of vibration and reduce the damaging effects of shock in the closed
position.
Tolerances
Dimensions in millimetres, Tolerance ± 0.5mm.
Diameters ± 0.1mm unless otherwise stated.
Weights and loads given in kg per pair of slides.
Travel (TR) ± 3.0mm.
Denotes dynamic cycles tested.
JET PRESS • Tel: 01623-551 800 • Fax: 01623-551 175 • Web: www.jetpress.com • E-mail: sales@jetpress.com 3
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103