New standard wins recognition SPECIALIST EQUIPMENT
N
etzsch has expanded its product off ering with the new sizes of the Tornado T2 rotary lobe
pump and responded to the increased demand for the rotary lobe pump. The new pump is compact, powerful, service-friendly and corresponds to the company’s successful Full Service in Place (FSIP) concept. The new T.Envi and
T.Proc 08/200 and 06/300 allow delivery rates up to 200 or 300 m³/h; back pressures up to max. 6 or max. 8 bar, can be achieved. The new
T.Sano and
T.Proc pumps in all-metal design, with delivery rates up to 8 m³/h and for back pressures from 8 or 10 bar have been specifi cally developed for lower volumetric fl ows in the process industry. The focus of the FSIP concept is the
consistent alignment with customer benefi ts. The ideas rest on the building blocks of greater reliability and service- friendliness, based on the motto “no maintenance is the best maintenance”.
The reversal of materials is just as
The pump cover of the entire pump chamber is easy to open and thereby facilitates convenient access from fl ange to fl ange without the pump needing to be dismantled from the pipework. All rotating parts can thus be easily accessed, signifi cantly facilitating dismantling and installation of the pump.
innovative. Metal rotors with elastomer inlays rotate in an elastomer casing, so that only metal and elastomer surfaces come into contact, which means the unit has an extremely high wear resistance. The pump has no dead space and will impress its operators even when using the most extreme media, because it is not prone to either clogging or blocking and is extremely easy to clean, thanks to its smooth surfaces. What’s more, the pump does not require any gear oil. It is driven and synchronised via a belt drive. The belt drive enables an even more compact design, which reduces the space required by the pump to a minimum. You just can’t build a rotary lobe pump any shorter or lighter. ●
For more information ✔ at
www.engineerlive.com/ime
For more information visit
www.netzsch.com
Helping OEMs reduce costs T
subakimoto Europe is helping mining equipment OEMs respond to mining company demands
for increased reliability and improved after-sales service, highlighting the capability, aff ordability and availability throughout Europe of its chain and power transmission products for mining applications.
With mining companies around the
globe relying on OEMs for strategic parts and equipment, a recent survey identifi ed the pressures that OEMs are under to meet the service levels expected of them whilst also remaining cost competitive. Tsubakimoto Europe is helping
OEMs to address these requirements on two fronts with its extensive range of chain products. First is to provide products that deliver inherent reliability, helping OEMs deliver mining equipment that reduces downtime and increases productivity. High quality materials and precision manufacture minimise wear and ensure long life, even in the most demanding mining applications. Further,
44
www.engineerlive.com
Tsubakimoto Europe works closely with OEMs to ensure that they are able to develop competitive products. Second is to assure prompt
and reliable availability of spare parts through a global network of production locations, sales outlets and alliance partners. This network means assured and prompt product distribution, meeting the needs of both OEMs and their end users. Being a leading global manufacturer of chain, one way clutches and linear actuators, Tsubaki can deliver full back-up and rapid response to customers’ local needs, wherever they are. The Tsubaki Group includes 46
production locations and 63 sales offi ces. The group works closely with OEMs to develop many diff erent sizes of mining chains. ●
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56