Fully-assembled and ready for installation
Exactly like the originals
CH26896
MP01790 Complete Stock Spindle Disc Brake Kits
Our complete stock spindle disc brake kits are ideal for any vehicle. These kits accept the original ball joints and tie-rod ends to minimize the need for modifications. Each pre-assembled kit includes new spindles, 11” rotors, loaded calipers, brackets, backing plates, bearings, seals, hoses and any necessary hardware. An original material brake line kit coupled with a power booster, master cylinder and OEM proportioning valve round out the comprehensive kit. The kit works with most 15” diameter wheels and moves the track width out 7/16”.
Skylark, 1964-72 Standard kits come with plain rotors and rubber hoses
MP01790 64-66 .......................................................................................................................................... KIT CH22001 67 .......................................................................................................................................... KIT M1790DX 68-72 .......................................................................................................................................... KIT
Price SALE 699.95 629.97 699.95 629.97 699.95 629.97
NOTE1: Stock Steering arms may need to be modified for installation on some early vehicles. Modification consists of enlarging mounting holes from 7/16” to 1/2” diameter. NOTE2: 1964-66 brake kits feature a 9” brake booster, while 1967-72 models feature an 11” booster. NOTE3: Due to design differences, OPGI recommends that you do not mix brake conversions from multiple manufacturers. NOTE4: You must use a 15" disc brake wheels or bigger with these kits. NOTE5: These items are OVERSIZED and require an additional freight charge. Please see our shipping policy for details.
Gold cadmium-plated, easy bolt-on installation and the original equipment design
Save on full kits CH26660
Skylark, 1964-72 Front Control Arms
CH26660 CH26660 CH26896 CH26896
64-72 lower................ left
Price SALE 167.99 136.79
64-72 lower................ right 167.99 136.79 64-72 upper w/shaft.. left
NOTE: Although lower arms are equipped with oval rear bushings, they can be used on any 1964-72 A-Body vehicles.
The best in the industry 122.99 99.79 64-72 upper w/shaft.. right 122.99 99.79
CH28009 SB0515
Power Brake Booster w/Disc Brake Master Cylinder
New power booster and master cylinder units are ideal when converting to disc brakes. The boosters feature a brilliant gold cadmium-plating. All of the correct firewall mounting brackets are installed as well as a brand new master cylinder unit for excellent stopping power.
LBS6872 67-72 11"........................ each 156.99 141.97 Skylark, 1967-72
NOTE1: Master cylinder pushrod is of original equipment design and must use the lower hole in the brake pedal. NOTE2: These high-performance items are not eligible for any further discounts or promotional pricing.
Price SALE
Skylark Coupe & Convertible; 1964-72 Complete Body
Bushing Kits SB0515 64-67 28 bushings.......... KIT
SB515K 64-67 28 bushings w/hardware........... KIT
SB0715 68-72 30 bushings.......... KIT
SB715K 68-72 30 bushings w/hardware........... KIT
Price SALE 89.95 82.98
109.95 82.98 89.95 79.99
119.95 106.89
NOTE1: Radiator support bushings are included in all kits. NOTE2: All part numbers with a "K" in them denote that mounting hardware (bolts, nuts, etc.) is included. NOTE3: Kits not available for any further discount.
1", 2", and 3" low profile springs
Drops from OEM ride height
Proportioning Valve
Proportioning valves are a vital part of the braking system and are necessary when converting from drum to disc brakes. Making sure fluid is going to the right place and maintaining correct pressure is important. OPGI has the right valve to get the job done.
Skylark, 1964-72 CH26775 64-72 disc/drum............. each
Price SALE 70.89 63.97
NOTE: This part is a replacement—mounting may differ from the original.
Low Profile Springs
Skylark & Riviera; 1961-76 OPGI low profile springs are available in 1", 2" and 3" drops from OE ride height. These ultra, high-quality springs feature the
Price *
NOTE: For optimum ride conditions, the manufacturer recommends using a set of high-performance or heavy-duty shocks on the rear, when using the 3" low profile springs.
correct variable spring rate for more than 100 different applications. Please call a sales representative (toll-free at 800-243-8355) with your vehicle information and spring height for specific part numbers. Made in the USA!
SALE 61-76 ........................................................................................................................... pair 189.95 Starting at 170.96 Sway Bars
Skylark, 1964-72 Due to continual large volume purchases, OPGI is able to offer
these prices on all high-performance sway bars. They are recognized throughout the high-performance industry to be the best anywhere.
Price SALE
ADDC883 64-72 1-1/8" front.......... each 148.95 74.95 ADDC709 64-72 1-1/4" front.......... each 169.95 99.95
CH28009 64-72 1-5/16" front, tubular.................. each 199.95 169.95
ADDC939 64-72 1" rear................... each 199.95 99.95 ADDC938 64-72 7/8" rear............... each 121.99 96.99
NOTE: These items are OVERSIZED and require an additional freight charge. Please see our shipping policy for details.
27
27
$70 OFF!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36