Renewable Energy
Shape is a common problem. Illuminated traffic bollards, for example, may need a special semi-circular curved shape that’s designed to fit perfectly into the top of the unit. Floating buoys out at sea with flashing beacons call for a circular disc design, with the solar cells arranged into a wide ring. Neither can be achieved with standard components that can only be bolted on. But although solar cells are rigid, it is possible to combine a series of “flats” to form shapes and profiles to suit the desired design.
the wrong reasons. Solar panels used trackside for rail applications and left unattended in remote stretches are an easy target for vandalism and theft. Military back packs with solar chargers need a discreet design to avoid the risk of glare. In instances like these, a material like Teflon which is duller than glass and can be textured is far more discreet. Another problem with conventional solar modules for this type of application is the shiny silver bus bars that are in stark contrast to the dark blue cells and light coloured substrate. By colouring the bus bars and using black anodised aluminium as a substrate with a textured Teflon cover, it’s possible to make very discreet, dull looking solar panels. Teflon brings other advantages, too.
Unlike glass, it won’t shatter on impact. It has a higher light transmittance than solar glass, with improved light efficiency for higher power output from a smaller module when space is at a premium. All that, and it’s less expensive too. It’s even being used on solar panels for environmental applications in remote camera systems to monitor wildlife. Te encapsulant normally used
in standard solar panels is EVA (ethylene vinyl acetate) – a common polymer that’s also found in everything
Fig. 2. and 3. More and more solar panels are finding their way into applications where they’re used for autonomously powering devices.
Weight is another common issue. Pole-mounted devices attached to street furniture for the remote monitoring of emissions can be at risk from high winds if the materials used are too heavy. Portable applications such as charging devices carried to power field equipment like radios or PDAs on expeditions or military excursions also need to be as light as possible. One solution here can be found in the materials used to support the solar cells and give mechanical rigidity. By using aluminium or fibreglass as a substrate, much thinner solar modules can be made. Wind uplift can be a
major problem on solar modules fitted onto
luxury motor homes. Off the shelf units made from glass, Tedlar and an aluminium frame have an overall depth of 30 to 40mm and have to be attached with PTFE brackets and adhesive – leaving a gap between the module and the roof that can cause aerodynamic issues. A solar module made from a combination of aluminium and Teflon, bonded directly to the roof, can achieve the necessary rigidity with a thickness of only a few millimetres, no gap, and much less risk of wind uplift. How about appearance and aesthetics? Glass can be quite reflective, and sometimes attract attention for all
50
www.engineerlive.com
from sunglasses to flip flops. Again this is fine for conventional domestic and commercial solar power uses. But for more especially demanding applications, other specialised encapsulants can also be used. Tink about aerospace applications, for example,
where solar panels fitted onto portable runway lights might be in the vicinity of 350 degree heat from the exhaust of a jet engine. Tink about solar powered lights for arctic expeditions, or powering GPRS in hot and dusty deserts. For harsh applications like these (as well as many far less demanding ones), conventional solar power units simply won’t cut it. As a specialised manufacturer of PV cells and custom-made, application-specific solar modules, Solar Capture Technologies produces around 10,000 units per year – in all shapes and sizes, with appropriate electrical output, and in small to medium volumes including proof of concept demonstrations and prototyping. With past roots in NaREC and BP Solar, the business is now completely independent with its own full design and manufacturing facilities – including testing under true atmospheric conditions such as sea water, humidity, and high and low temperatures. So if you thought that all solar panels have to be
flat, rectangular, and only made out of glass, a Tedlar back sheet and an aluminium frame, it might be time to think again. Te solar application that you never thought possible might be well within your reach. l
Alex Savidis is Applications Manager, Solar Capture Technologies, Blyth, Northumberland, UK.
http://solarcapturetechnologies.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60