SWITCHES/ROUTERS/POE/ADAPTORS Poe+ Managed Midspans Injectors / Adapters
NETPOWER™ 8 and 16 Port Web Managed PoE+ Midspan Injectors
Operation 8 or 16 ports 32W IEEE 802.3at compliant
10/100/1000 BaseT Gigabit support Accepts AC or DC operating power Plug and play installation Extended temperature range operation up to 70° C Programmable port priority (load shedding) Port disable via external control input (access control panel, switch or other device)
Remote port management PoE shutdown per port or all ports simultaneously Set optional upper and lower limits for the measured voltage and current of each port
Email/snmp notification of port condition If port draws over a preset current If port loses output voltage
Service-saving Performance
Cycle camera anywhere via the web! Browser-based dashboard monitors and controls all ports Email or SNMP notification on port fault for administrators Individual port reboot control eliminates site visits to recycle power
Built-in 48VDC battery charger provides cost effective PoE backup over traditional UPS
Illuminated master power switch with circuit breaker 1U rackmount or wallmount (with bracket included) Lifetime Warranty
J7-NPR50016M 500W 16 port, charger J7-NPR50016MC 500W 16 port, fast charger J7-NPR25016M 250W 16 port, charger J7-NPR25016MC 250W 16 port, fast charger J7-NPR2508M
250W 8 port, charger J7-NPR2508MC 250W 8 port, fast charger 90 NETPOWER™ Single Port Injectors
Power IP cameras, PTZ, heaters, access control door controllers, and other similar PoE, PoE+ equipment
15W IEEE802.3af, 30W IEEE802.3at with standard or din rail mounting
Listed to UL294B Operate from 24V AC or DC input Reset feature allows PoE shutdown Battery backup capability Data rate 10/100/1000 BASE-T compliant Visual diagnostics by on board LED Lifetime Warranty
J7-NPM115
J7-NPM115DR 15W PoE IEEE.802.3af, din rail mount J7-NPM130
NETPOWER™ Single Port Adapters
Allows powering of non-PoE complaint IP fixed or PTZ camera
30W IEEE 802.3at with standard or din rail mounting
Listed to UL294B 12VDC output power derived from PoE source
Selectable for 13W or 25W output to match the PoE source
Data rate 10/100/1000 BASE-T compliant
Visual diagnostics by on board LED Lifetime Warranty
J7-NPE130
25W 48V PoE to 12V DC IEEE802.3at, screw mount
J7-NPE130DR 25W 48V PoE to 12V DC IEEE802.3at, din rail mount
15W PoE IEEE.802.3af, screw mount 30W PoE+ IEEE.802.3at, screw mount
J7-NPM130DR 30W PoE+ IEEE.802.3at, din rail mount
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132