This page contains a Flash digital edition of a book.
Bi-Metal DEEP CUT BI-METAL HOLE SAWS


The Deep Cut saw combines the tried and tested tooth form from the previous Dual Pitch product, with a new tooth material for enhanced heat and wear resistance.


The Deep Cut saw also features an increased hole saw depth of 2" (51mm), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 2" (51mm) thick.


FEATURES


• Aggressive material penetration and kerf clearance • Ideal for solid materials or tubes of a wall thickness greater than 3mm


• 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube


• New tooth material for enhanced heat and wear resistance and greater product life • Hole saw depth of 2" (51mm)


Cat. No. EDP


Diameter in


DCH0034-G 00427 3/4


mm 19


DCH2532-G 00481 25/32 20 DCH1036-G 00473 13/16 21 DCH0078-G 00428 7/8


DCH1056-G 00474 15/16 24 DCH0100-G 00429 1


DCH0116-G 00432 1-1/16 27 DCH0118-G 00433 1-1/8 29 DCH0136-G 00435 1-3/16 30 DCH0114-G 00431 1-1/4 32 DCH0156-G 00437 1-5/16 33 DCH0138-G 00436 1-3/8 35 DCH0176-G 00439 1-7/16 37 DCH0112-G 00430 1-1/2 38 DCH0196-G 00441 1-9/16 40 DCH0158-G 00438 1-5/8 41 DCH1116-G 00475 1-11/16 43 DCH0134-G 00434 1-3/4 44 DCH1136-G 00476 1-13/16 46 DCH0178-G 00440 1-7/8 48 DCH0200-G 00442 2


51


DCH0216-G 00445 2-1/16 52 DCH0218-G 00446 2-1/8 54 DCH0214-G 00444 2-1/4 57 DCH0256-G 00449 2-5/16 59 DCH0238-G 00448 2-3/8 60 DCH0212-G 00443 2-1/2 64 DCH0296-G 00452 2-9/16 65 DCH0258-G 00450 2-5/8 67 DCH068M-G 00472 2-11/16 68 DCH0234-G 00447 2-3/4 70 DCH0278-G 00451 2-7/8 73 DCH0300-G 00453 3


76


DCH0318-G 00456 3-1/8 79 DCH0314-G 00455 3-1/4 83 DCH0338-G 00458 3-3/8 86 DCH0312-G 00454 3-1/2 89 DCH0358-G 00459 3-5/8 92 DCH0334-G 00457 3-3/4 95 DCH0378-G 00460 3-7/8 98 DCH0400-G 00461 4


Cat. No.


DCH160M-G DCH168M-G DCH177M-G DCH210M-G


EDP


00477 00478 00479 00480


Diameter mm 160 168 177 210


22 25


Applications Hole Saw Depth


Rec. Cutting Depth Metal


Inox (stainless) Non Ferrous Metals


Cast Iron Wood Nail Embedded Wood Veneer Plastic Acrylic Fiberglass Formica Plaster Suspended Floors (wood)


3-13mm >13mm


2" (51mm) 9


9             CUTTING PERFORMANCE - Excellent  | Satisfactory 


New!


102


DCH0418-G 00464 4-1/8 105 DCH0414-G 00463 4-1/4 108 DCH0438-G 00466 4-3/8 111 DCH0412-G 00462 4-1/2 114 DCH0434-G 00465 4-3/4 121 DCH0500-G 00467 5


127


DCH0514-G 00469 5-1/4 133 DCH0512-G 00468 5-1/2 140 DCH0600-G 00471 6


152 starrett.com 13


HOLE SAWS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156