127
Voltage / Phase Monitors
Single-phase and three-phase voltage monitors provide basic protection against equipment failure caused by line-side volt- age faults and rapid cycling (se- lect models also protect against load-side voltage faults).
Enhanced Power Monitors
Our enhanced power monitors provide all of the protection and features included with an enhanced overload relay, and are de- signed specifically to support low horsepower and/or low speed motor applications
Alternating Relays &
Pump Controllers Designed to balance the run time between two independent loads, typical in many pumping and compressor applications. By balancing the run times, redundant equipment is equally exercised to provide greater system reliability.
Remote Monitoring, Communications
& S/W Accessibility SymCom communications modules, software, and remote monitors provide accessibility and safety for enhanced overload relays and power monitors through many common industrial protocols.
Enhanced Overload
Relays Monitors SymCom single-phase and three-phase UL listed enhanced overload relays monitor for both line side voltage problems and load side current faults, providing an added layer of protection over voltage mon- itors and other basic overload relays.
Load Sensors Measure current levels to deter- mine feed rates, tool wear, loss of prime on pumps and many other types of overload and underload conditions. These load sensors are useful as proof relays to verify that current is flowing, and are available with adjustable setpoints and trip or restart delays.
Intrinsically Safe
Relays / Controllers SymCom intrinsically safe relays and controllers are specifically designed to interface con- trols between hazardous and non-hazardous areas. Intrinsi- cally safe relays limit the energy that is provided to the haz- ardous area, thus reducing the potential of a spark.
Seal Leak & Leak / Temp Relays
SymCom seal leak and leak/ temp relays provide pro- tection against seal leaks and over-temperature by monitoring sensors within the pumps and providing early warning or disabling the pumps.
symcom.com Tel: 800.971.4242 • Fax: 800.929.2302 •
sales@beyondc.com •
www.beyondcomponents.com Impeccable customer service • Technical support and factory warranties
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140