LDSUB10A + 2 x 4 LDSAT42(W) LDSUB10A + 2 x 2 LDSAT62(W) LDSUB10A + 2 x 2 LDSAT242(W)
74
SPECIFICATIONS Model name / type:
POWERED SUBWOOFER
The LDSUB10A is a very compact and powerful 10“ subwoofer. This multi-talent can be used as an additional bass with full-range speakers (Stinger 8“ or Stinger 10“) or be implemented for installation applications. This subwoofer features an integrated 3-channel power amplifier (3 x 120 W RMS) allowing the connection of additional passive full-range speakers, or of installation speakers such as the LD SAT series speakers.
Possible and meaningful combinations for installation applications: Frequency range: Power output (RMS / peak):
Connectors: Controls:
Protection:
Dimensions (W x H x D): Weight:
Powerful, dynamic 2 x 8“ Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
LDSUB10A / bass reflex 40 Hz - 120 Hz
3 x 120 W ( 120 W for subwoofer + 2 x 120 W for external speakers) / 3 x 240 W ( 240 W for subwoofer + 2 x 240 W for external speakers)
Input: line In: 2 x XLR/ 6,3mm jack (combo) output: binding post
Volume, subwoofer level, 180° phase switch Short circuit, over current, clip limiter 505 x 345 x 425 mm 21 kg
SUB88A POWERED SUBWOOFER
The active alternative to our top-seller SUB88. The SUB88A features a 150 Watt Mono-amplification unit offering great sound and dynamic characteristics. It is a perfect partner for the SAT62A active speaker or for the passive models SAT42/242/62 in combination with an external amplification unit. It can naturally be used with any other high/medium speaker if you wish to complete your sound with a deep and powerful bass foundation.
SPECIFICATIONS Model name:
Frequency range:
LDSUB88 40 Hz - 120 Hz
Rated system power (cont./ peak): 2 x 100 W / 2 x 180 W Sensitivity (1W/ 1m): Max. SPL: