LOADERS
ATTACHMENTS
ANGLE BROOM
• Three widths: 48, 68 and 84 in. • With fi ngertip controls, hydraulically angle the 68- and 84-in. models
• NEW: heavy-duty orange bristles available; longer-lasting, durable bristles
Compatible Equipment CT CTL MTL SSL TH UWM
AH30 ASPHALT HEATER
• Part of new asphalt preservation tools
• Powered by a 36 kVA generator and connected to Bobcat® with Bob-Tach®
• Three electric heating units • Four adjustable jack stands
NEW
Compatible Equipment CTL SSL
AP40 ASPHALT PROCESSOR
• Part of new asphalt preservation tools
• Processes, remixes and levels the asphalt surface
• Direct-drive hydraulic motor • Offset mounted for good visibility
NEW
Compatible Equipment CTL SSL
NEW: ASPHALT PRESERVATION TOOLS VIDEO
See the new Bobcat asphalt preservation attachments in action. This short video will give you an introduction to the new attachments available from Bobcat and how to properly operate them.
Scan this code with your smartphone using a code reader application available from your favorite app store.
If you don’t have a smartphone, visit
www.MyWorkSaver.com/asphalt/tools to watch the video.
AUGER
• For effi cient installation of fence posts, planting trees or digging footings
• Six models available; drills 6- to 42-in. holes
• Unique knuckle-joint design helps ensure plumb-line accuracy
Compatible Equipment CT CTL MTL MX SSL TH UWM
BACKHOE
• Digging depths from 6 to 11 ft. • Bucket widths from 9 to 39 in. • Optional rear stabilizers and street pads available
Compatible Equipment CT CTL MTL SSL
BUCKETS
BUCKET (FERTILIZER AND GRAIN)
• Greater rollback range allows you handle large volumes of granular material with minimum spillage over the front edge
BUCKET (GENERAL PURPOSE)
• With a longer bottom than the dirt bucket
• The general-purpose bucket is excellent for light-duty grading, leveling and material handling on smaller Bobcat loaders
LOW PROFILE BUCKET (LOW PROFILE)
• The low-profi le bucket works well in many grading, leveling and material handling applications
• A bolt-on grapple attachment expands the capabilities of this bucket
loader mounting system
BOB-TACH®
BACKHOE
• 6-ft. digging depth • Three bucket widths: 13, 16 and 20 in.
• Dipper swings left or right 48 degrees to dump spoil without moving the loader
Compatible Equipment CTL SSL
BALE FORK
• Bale fork length: 40.8 in. • Two small-diameter forks penetrate material to stabilize it
• Mounts to standard or heavy-duty pallet fork attachment frame
Compatible Equipment CT CTL SSL UWM
BORING UNIT
• Install utilities under driveways and sidewalks with minimal surface damage
• 36 in. wide • Bore as deep as 2 ft. below the surface and as far as 30 ft. horizontally
Compatible Equipment MTL SSL
BOX BLADE
• 84-in. grading attachment; laser-guided option available
• Foam-filled tires that never go fl at for uptime protection
• Fingertip control of blade raising and lowering function
Compatible Equipment CTL SSL UWM
BRUSHCAT™ ROTARY CUTTER
• Clear brush, thick grass, trees and saplings up to 3 inches in size
• Five models; 2-in. cutting height; optional 3-in. cutting height
• 60- and 72-in. cutting widths
Compatible Equipment CTL SSL TH (V417 only) UWM
36
WorkSaver BobCatalog 2013
EQUIPMENT KEY: CT (Compact Tractor) CTL (Compact Track Loader) MTL (Mini Track Loader) MX
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60