Wear Protection
Burner wear components for coal fired power plants
Robert Howard describes the negative impact of eroded and deformed burner nozzles and core air tubes.
C
oal-fired power plants now have the answer for burner system components failing due to heat deformation or coal particle erosion. Corner fired burner nozzles and core air protection tubes for
wall fired burners made from Ceraforte experience extended life times of up to 6 times in operation and are compatible with all burner systems. Ceraforte is a drop in replacement for steel components that fail in operation due to heat deformation and wear. Since the early 1980s, Elkem Silicon Materials has
developed the Ceraforte family of materials through extensive testing, both in their laboratories and in industrial applications. Focusing on properties such as strength, wear and chemical resistance and high temperatures operations up to 1500°C, Ceraforte is designed to be a ‘drop in’ replacement for steel in burner systems. All PFC fired units suffer wear, heat damage and slag in their burner systems due to the quality of the coal, choice of wear parts and the operating regime of the plant. Switching from stainless and mild steels to Ceraforte for burner system wear parts will significantly help maintain the original PFC distributions and the design efficiencies of the boiler thus minimising coal usage and downtimes. Ceraforte maintains it shape throughout its entire
lifetime. It is resistant to coal particle erosion due to the Silicon Carbide aggregates and is virtually impervious to thermal shock and heat damage.
Burner Nozzles and Core Air Tubes Corner fired boilers create a thoroughly mixed fire ball fed tangentially from the corners of the boiler through PFC burner nozzles. Tis fireball must be kept in a turbulent and free mixing state to ensure optimum combustion. Trough the tilting mechanism on the burner nozzle, the fireball is moved up and down inside the boiler furnace cavity to control the temperature of the steam leaving the boiler. As the original stainless steel nozzles wear out and deform during their 18 to 24 months life, the original PFC distribution and the ability to control the shape and location of the fireball is lost. Tis immediately and negatively impacts the boiler efficiency. Replacing stainless steel nozzles with Ceraforte will ensure that the boiler will not operate with efficiency
losses due to nozzle deterioration. Further benefits are gained due to the long operating life of Ceraforte in relation to Stainless Steel, effectively 3-4 times longer under the same operating conditions. Tis means that the burner nozzles only have to be replaced once in every six to eight years, instead of every two years. With front and opposed wall fired boilers, PFC
and primary air is fed into the boiler furnace through circular PFC burners. Te point at which PFC and primary air come into contact with the steel components of the burner is the point of change in direction of flow and the point at which most erosion takes place. Tis erosion is generally severe and causes a considerable amount of down time and repair work. Te replacement of the
current steels with a Ceraforte tube over the core air pipe will greatly extend the life of these components. When wear takes place, the tube is rotated to move a new Ceraforte surface into the path of the PFC stream resulting in a lifetime extension of 4-6 times or current solutions. Ash deposits adhering on the furnace walls in and around the burner zone can cause pressure part wastage, leading ultimately to tube failure and un-anticipated shutdowns. Te non-wetting qualities and characteristics of Ceraforte minimises slag in and around the burner zone allowing for a clear and uniform flow path for the pulverised fuel to exit the burner nozzle.
Te silicon carbide based material is formulated to
be resistant to thermal shock and heat damage and to have high abrasion resistance. Unique among all high temperature materials tested, Elkem Ceraforte actually increases in strength up to 1500°C and can be cast in any shape required. Minimum wall thicknesses begin at 15mm for core air tubes and 25mm for burner nozzles. Trowellable versions can be put directly on the inside surfaces of the burner system and other hard to get areas that are susceptible to slagging. Expected life times are 2-3 times stainless steel in the same operating conditions. ●
Enter 53 or ✔ at
www.engineerlive.com/ipe Robert Howard is with Elkem Silicon Materials, Kristiansand, Norway.
www.elkem.com/silicon-materials www.engineerlive.com 53
Fig. 1. A nozzle after five years in service in South Africa.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60