Choose from nine Bobcat snow removal attachments to effi ciently clear snow and ice from established surfaces


While much of Canada and the United States got a pass last winter, a repeat is not likely. Be prepared this year with the attachments and implements available from your local Bobcat dealer. If you’re moving snow or ice, Bobcat has an attachment for that!


Product key CT: compact tractors CTL: compact track loaders


MTL: mini track loaders SSL: skid-steer loaders TC: ToolcatTM


TH: telehandlers UV: utility vehicles


utility work machines


1. ANGLE BROOM


• Compact design and durable poly bristles make it perfect for light snowfalls • Adjust the sweeping angle hydraulically from inside the cab using fi ngertip controls • The broom has a quick-change rotor design for fast bristle replacement CT, CTL, MTL, SSL, TH (V417 only), TC


2. BUCKET (SNOW)


• Clear parking lots, driveways, sidewalks and walkways with speed and effi ciency • Customizable buckets offer waffl e-type skid plates that back up the cutting edge and add strength to the bottom of the bucket for longer life CT, CTL, SSL, TC, UTV* (3450 only)


3. PUSH BROOM


• Sweep light snow with ease and effi ciency • A push broom attachment is 20 to 30 times faster than hand sweeping, dramatically reducing snow removal costs CTL, SSL, TC


4. SCRAPER


• Self-sharpening cutting edges slide along the ground, making easy work of clearing hard-packed snow and ice • The 36- and 45-inch models leave a smooth surface for walking or driving CTL, SSL, TH (V417 only), TC


5. SNOW BLADE


• Five standard-duty models and three heavy-duty models • Moldboard angles hydraulically 30 degrees left or right for preferred snow placement • Optional end-wing kit and create a high- production snow pusher for open areas CT**, CTL, MTL, SSL, TH (V417 only), TC, UTV (3450 only)


6. SNOW PUSHER


• 96- and 120-inch free-fl oating blades effi ciently remove snow from uneven surfaces, protecting the integrity of stones, decorative concrete and sloped sidewalks CTL, SSL, TH (V417 only), TC


7. SNOW V-BLADE


• Allows fi ngertip adjustments of fi ve blade positions to plow through the deepest snow • Use it as a V-Blade to clear a path through deep snow; as a scoop blade to scoop, push or pile snow; a straight blade to pile large amounts of snow; and as an angle blade to push snow to the right or left • Available in fi ve sizes CTL, SSL, TH (V417 only), TC


8. SNOWBLOWER


• Clear paths through deep snow, 36 to 84 inches wide


• Rotate the chute without leaving the cab and blow the snow where you want it to go • 3-point-hitch version for compact tractors and Toolcat™ 5610 utility work machines CT, CTL, MTL, SSL, TH (V417 only), TC


*Bucket and snow blade are approved for use with the 3450 utility vehicle and RapidLink™ **Available in front-mount or loader-mount. Loader-mount requires front-end loader with Bob-Tach® system and front auxiliary kit.


attachment system. mounting


9. SPREADER


• Three different models quickly distribute sand and salt • To save even more time, load the hopper from the back of a dump truck • Control the variable speed and adjust the spreading pattern from 4 to 40 feet • Add a rear spreader for the Toolcat 5600 SP5: CTL, SSL


HS8: CT**, CTL, SSL, TC SP12: TC (5600 only)


FALL 2012 | WorkSaver S3

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36