The Bosch rubber blow-out bulb is designed to clean holes before setting anchors. f Palm-sized rubber bulb designed for all hand sizes f Long nozzle for deeper clean out f Air intake valve for high-volume air flow
Item # T1854
Description Anchor blow-out bulb
Concrete Screw Anchoring System Holds tight tolerances that are critical to precision anchoring
SDS-plus® shank
SDS-plus® Bulldog™ Hex Drive Rotary Hammer Bits
For use with masonry fastening systems/hex sleeve drive tools. Hex drive on bit fits into driver sleeve.
Common Applications: f Conduit f Electrical boxes f Pipe straps f HVAC strapping f Sign fastening f Window frames f Backer boards
SDS-plus® Bulldog™ Hex Drive Accessory and Kit
For use with masonry fastening systems/hex sleeve drive tools. Hex drive on bit fits into driver sleeve. f 1/4" hex shoulder for drive sleeve used to set masonry screws
Item # Description
AD2300 Anchor drive sleeve used to set masonry screws and concrete anchors. Accepts 5/32", 3/16" and 1/4" bits
HC2309
7 pc anchor drive installation kit: 5/32" × 6-1/2" and 3/16" × 6-1/2" hex bits, #2 and #3 Phillips® power bits, 5-3/4" sleeve, 1/4" and 5/16" sockets
NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
D-tect150 Wall/Floor Scanner with Radar
The Bosch D-tect150 Wall/Floor scanner detects the material type, exact depth and relative width of objects located beneath the surface. It can even detect rebar in up to 6" of cured concrete.
See pages 290–291 for more information on the D-tect150 wall/floor scanner.