19


New technology cuts power consumption.


Power Pulse™ technology reduces power consumption by electronically regulating the power applied during periods of high and low usage.


Tightest temperature control.


Power Pulse™ also maintains the tightest possible temperature control.


Sleeps when inactive.


The system can be pre-set to power down or power off after 2 hours of non use.*


Power down.


Powering down allows the stored boiling water to reduce to an energy saving 65°C, with the system recovering quickly upon further draw off.


Power off.*


Powering off allows the boiling water to gradually cool to ambient temperature with the boiling cycle resuming at the next draw off.


Programmable 24/7 timer. # Pre-set the “power on” and “power off” times for those periods when the Zip HydroTap will not be used, such as overnight or when the house is unoccupied.


Cuts down water wastage.


Zip HydroTap only dispenses the water that you need so there is no water wasted by over-filling kettles.


* Miniboil and DOMHB1 powers down only. # Feature not available on Miniboil and DOMHB1


What is the energy cost of your Zip HydroTap?


Costs vary according to power supplier and your usage. Assuming a cost of 10p per kW and with sleep mode operating 10 hours in 24, estimated energy cost is less than 10p per day. The estimated added cost for heating and chilling water dispensed is:


Boiling water = eight 167ml cups for 1p (that’s 800 cups for £1).


Chilled water =twenty 200ml glasses for 1p (that’s 2,000 glasses for £1).


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20