25AP Recommended Saw Size: up to 38cc, Bar Length: up to 16 inches (41cm).
GAUGE
STANDARD SEQUENCE 25AP
KICKBACK SAFETY*
CUTTER TYPE
CUTTER END VIEW
25AP is the replacement chain for small saws originally equipped with 1/4"-pitch chain.
FEATURES • Micro Chisel® cutters have small-radius working corners for excellent performance and ease of maintenance
.050"
• Small size and light weight make 25AP easy to use and highly maneuverable.
• Patented Chain Steel - OREGON® OCS-01 steel is patented and provides greater durability, especially in cold cutting conditions.
90S — MICRO-LITE™ Recommended Saw Size: up to 42cc, Bar Length: up to 16 inches (41cm).
GAUGE
STANDARD SEQUENCE 90S
KICKBACK SAFETY*
CUTTER TYPE
CUTTER END VIEW
90S chain is part of a Micro-Lite™ narrow-kerf cutting system that requires less power from the saw to cut than standard cutting systems.
.043"
FEATURES • Low- vibration Chamfer Chisel™ cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
• Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
• Always install 90S chains on a .043" gauge Micro- Lite™ bar (MLE part numbers) to obtain all the advantages of the Micro-Lite™ system.
LubriLink™ tie straps help keep oil where it’s needed – on the chain. LubriWell® oil holes help carry oil around the full length of the guide bar’s groove. Vibe-Ban® chassis design reduces vibration 25% or more at the handles. Witness Mark™ Top-plate witness mark makes accurate sharpening easier.
Chamfer Chisel™ cutters’ twin cutting corners offer outstanding performance, durability and easy maintenance. Micro-Lite™ narrow-kerf cutting systems increase cutting efficiency and require less power from the saw than standard cutting systems.
80 FOR
* Refer to the “Kickback Reducing Features - Icon Key” listing on page 75 for all kickback icons. Saw Chain - Round Ground