This page contains a Flash digital edition of a book.
PRODUCT PREVIEWS


3D Fiber-Laser Machine LT-Free is a fi ve-axis fi ber-laser machine designed for cutting three dimensional formed or shaped parts such as bent tubes, hydroformed tubes, welded assemblies, and stamped or fl at sheets. LT-Free has power up to 5 kW, table dimensions of 59 × 39” (1500 × 990 mm), and X-Y-Z axis stroke to 116 × 37 × 29” (2946 × 939 × 736 mm). Traditional


cutting, drilling, punching and milling operations, normally carried out in sequence, can now be performed on a single machine. It is ideal for machining mild steel, copper, alumi- num, brass, stainless steel, and galvanized steel. The LT-Free series is available in three versions: High Flex for bent and


hydroformed tubes, fl at and deep-drawn sheet, or welded assemblies; Piece Value version with rotary turntable and automatic load/unload for high productivity machining; and Entry Level version with dual fi xed table for a wide variety of part confi gurations. BLM Group USA Corp. Ph: 248-560-0080 Web site: www.blmgroup.com


Compact, High-Performing Work Supports Carr Lane Roemheld offers a wide range of hydraulic work supports that automatically adjust to the workpiece height, then lock securely to become fi xed rests. Available in spring ad- vanced, fl uid advanced, and air advanced types, these work supports are extremely compact, start- ing at just 1" (25.4-mm) diameter, with maximum pressures up to 7500 psi (51.71 MPa). These high performing supports are


designed for 500,000 cycles, and come in more than 60 dif- ferent standard sizes and styles, with supporting forces from 145 to 23,000 lb (65.7–10,432 kg). Carr Lane Roemheld Mfg. Co. Ph: 800-827-2526 Web site: www.clrh.com


V 2.0 Zero-Point Tooling System MTS 2.0 is a modular tooling system that features total monitoring feedback, a maximum clamping power of 20,000 N, and enhanced precision for the most exacting machining demands. The use of state-of-the-art ceramic lock balls combined with innovative springs increase clamping power while allowing an opening pressure of only 6 bar (0.60 MPa). The MTS 2.0


also only needs 6 bar of pneumatic pressure for the reclamp- ing function which results in a clamping power of 20 kN per chuck. This is an improvement of 60% when compared to


86 AdvancedManufacturing.org | June 2016


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130