The UVC lamp is primarily intended to demonstrate the photoelectric effect using a zinc plate and gold leaf electroscope. The lamp emits UVC light with a peak wavelength of 253.7nm and must not be used as a general purpose UV light source. This lamp is an excellent replacement for the now obsolete Philips TUV6 lamp. The UVC bulb is housed in a robust Aluminium extrusion and is supplied with a 24V d.c. power supply.
Specification: Lamp Wattage
Spectral peak UV output
UV micro watts Average Life E8R07212
C. UVC Bulb
The UV bulb is a replacement for the bulb supplied with the UVC Lamp. E8R07211
D. UVC retrofit lamp
The Retro-fit UVC lamp is a new UVC lamp and ballast specifically designed to replace the discontinued Philips TUV6 UVC bulb. The new UVC lamp and ballast have been designed to fit the original Philip Harris UVC lamp housing and the height of the ballast has been set so that the filament height is the same as the original TUV6. It may be used in any lamp housing originally fitted with a TUV6 bulb that can accommodate the 70mm diameter ballast.
E8R07757 E. Sunlight Beads
Made from sun-sensitive white plastic that changes to vibrant colours in the sunlight. Colours fade back to white upon returning inside and will become coloured again every time they are exposed to sunlight. Assorted colours.
E8R06922 F. Zinc Plate
A 40 x 40mm zinc plate on a 4mm connector which can replace the top plate of an electroscope.
The plate can be used to show discharge under UV Lighting and the photo-electric effect. A suitable wavelength UV lamp is required. Dimensions: 40 x 40 x 25mm.
Mass 0.03kg. E8R07366
each £23.95 NEW E F pack 500 £12.95 C D each £81.95 each £23.95 3W