This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Special Stain reservoir 180 ml (6140) – The Special Stain Reservoirs can be combined with the standard or expanded solution configuration. The special stain configuration includes eight solution reservoirs. The special stain reservoirs can accommodate a volume of 160 - 180 ml of solution
Heated Solution Reservoir 180 ml (6141) – The heated Solution Reservoir works in conjunction with the special stain setup. The two independent heated stations can be programmed to heat special stains to 30 – 70°C.
Special Stain Reservoir Lid (6144) – The Lid for the Special Stain Reservoir is a single lid used to cover the special stain reservoir when not in use.
Small Solution Reservoir, 285 ml (6145) – The Small Solution Reservoir can be used with the standard solution reservoir. With the expanded configuration there are a total of 54 stations and are arranged with 6 station in the front row and eight station in the other six rows> The small solution reservoirs can accommodate 255 – 285 ml of solution.
Small Solution Reservoir Lid (6146) – The Lid for the Small Solution Reservoir is a single lid use to cover the small solution reservoirs when not in use.
Standard Solution Reservoir, 820 ml (6147) – The Standard configuration of standard solution reservoirs is a total of 30 stations with six stations in the front row and eight stations in the other three rows. The standard reservoir accommodates 680 – 820 ml of solution
Load/Unload Reservoir, 830 ml (6148) – This is a Standard Solution Reservoirs with handles are placed in the front row of the instrument. These reservoirs have a handle for easy removal and are used as the start/end stations. The reservoir volume is 830 ml.
Slide Stainer that contains openings positioned for maximum water flow. Each reservoir has an 850 ml volume.
820/830 ml Reservoir Lid (6151) – The Lid for the Standard Solution is a single lid used to cover the reservoirs when not in use.
Wash Reservoir, 850 ml (6149) – The Wash Reservoir is a specially designed reservoir to be used exclusively with the Tissue-Tek® Prisma®
3 Position Reservoir Tray (6152) – The solution reservoirs are arranged in a one level configuration and are positioned in either a 3 or 4 position reservoir tray. These trays can hold multiple solutions to allow for easy placement into and removal from the instrument. The trays are designed to ensure proper orientation when placed into the instrument.
3 Position Reservoir Tray Lid ( 6153) – This 3-Position Reservoir Tray Lid is a one piece lid to cover all reservoirs located in the 3-position reservoir tray.
4 Position Reservoir Tray (6154) – Same as 3-position reservoir tray but has 4-position.
4 Position Reservoir Tray Lid (6155) – Same as 3-position reservoir tray lid but designed for 4-position reservoir tray.
Special Stain Reservoir Tray (6156) – This special stain reservoir tray is a 8-position tray that holds the special stain reservoirs inside the Prisma®
Fume Filter (6160) - The fume filter for the Tissue-Tek®
Film® and Tissue-Tek ® Prisma®
Coverslipper Stainer is
sufficient in removing fumes that are generated during routine use. It is recommended that the filter be replace once a month. Fume filters are packaged 2 to a case.
Start & End Labels (6161) – The station labels are designed to be attached to the Start, End or PE station for reservoir identification.
Basket Adapter Labels (6162) – Color coded basket adapter labels are positioned on the basket adapters for easy stain identification
Screen Protection Sheet (6163) – This accessory is for use exclusively with the Tissue-Tek® control panel from scratch.
Prisma® Prisma® Slide Stainer. Slide Stainer, to protect the
Compact Flash Card (6164) – The compact flash card allows data to be transferred to the PC. This accessory is for use exclusively with the Tissue-Tek®
Exhaust Duct Adapters (6165 & 6166) – The Tissue-Tek®
Stainer offers an optional Duct Connection Adapter which connects to an external exhaust system for added protection. Two sizes are available, 38 mm and 75 mm,