This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Precision Cryo-embedding System (continued) 6. Embedding Shelf
This removable shelf can be installed below the opening of the cryostat in the most
convenient and Well Bar Sets
We offer these Well Bar Sets to make your ordering easier and to offer you a complete set for facilitate your work:
Cat # 61700-01 61728-LM
location available. The selves can be made in various sizes to accommodate most instruments.
Also available two more models of 3 pieces shelf size 4 x 8" for temporary or permanently installation. One for Leica or Micron cryotats, and one for Shandon Cryostat
61728-01 61728-LM 61728-Sh
Embedding Shelf, size 4 x 8" Embedding Shelf for Leica/Micron Embedding Shelf for Shandon
7. Well Bar Storage Platform
This stainless steel plate to fit to the Laica cryostat for storing Well Bar inside the cryostat
Cat # 61730-01 Description
8. Chuck Adapter
This Chuck Adapter machined to fit Shandon and Ames / Tissue-Tek cryostats.
61731-01 Cat #
Description Chuck Adapter for Shandon Chuck Adapter for Ames/Tissue-Tek
9. Frozen Section Brushes Flat white boar bristle brushes which are cut into an angle. These stiffn bristles will prevent the frozen section from curling through the brush. We offer a set of four brushes: two #1 with 3 1⁄4
Includes: Three sizes well bars (61710-18, 61710-24, 61710-30); Six small chucks (6 x 61720-28); Four large chucks (4 x 61720-36); Four Over-Chuck Freezing Blocks (4 x 61725-01); One Chuck Bin (1 x 61725-50); 16 Dispensing Slide (61727-08); Cutting Board/Freezing Girdle (61733-01); 1 Elevated Freezing Block (61734-01); 1 Angle Embedding Forceps (78359-124); and accessories 61701-01
Well Bars Set 102 set
This set is dedicated for Ames / Tissue-Tek Cryostats. Includes: Two sizes well bars (61710-18, 61710-24); Six small chucks (6 x 61720-28); Four large chucks, 36x28mm (4 x 61721-36); One Chuck Adapter (61732-01); Four Over-Chuck Freezing Blocks (4 x 61725-01); One Chuck Bin (1 x 61725-50); 16 Dispensing Slide (61727-08); Cutting Board/Freezing Girdle (61733-01); 1 Elevated Freezing Block (61734-01); 1 Angle Embedding Forceps (78359-124); and accessories 61704-01
Small Embedding Well Bar Set Medium Embedding Well Bar Set Large Embedding Well Bar Set 24/30 mm Well Bar Set 50/30 Well Bar Set set
Includes: One 18 mm Well Bars (61710-18); Four Small Chucks (61720-28); Two Over Chuck Freezing Blocks (61725-01); Dispensing Slides (61727-08); Accessories included. 61704-02
Includes: One 24 mm Well Bar (61710-24); Four Small Chucks (61720-28); Two Over Chuck Freezing Blocks (61725-01); Dispensing Slides (61727-08); Accessories included. 61704-03
Includes: One 30 mm Well Bars (61710-30); Four Small Chucks (61720-36); Two Over Chuck Freezing Blocks (61725-01); Dispensing Slides (61727-08); Accessories included. 61704-04
Includes: One Well Bar with two wells 24 mm and two wells 30mm (61712-34); Two Large Chucks (61720-36); Two Small Chucks (61720-28); Two Over Chuck Freezing Blocks (61625-01); 8 Dispensing Slides (61727-08) 61704-05
Includes: One Well Bar 50 x 30 mm (61713-50); Two Large Chucks (61720-36) Two Small Chucks 55 x 36 mm (61721-55) 61704-06
20 x 20 mm Deep Well Bar Set
Freezing Griddle/ Elevated Freezing Block Set
Includes: " angle cut and #2 with
Cutting board / Freezing griddle — The steel “freezing griddle” serves as a freezing surface on which to prepare frozen blocks when used in conjunction
with the elevated freezing block. The small attached cutting board serves as a cold surface to cut the frozen block while maintaining the freezing temperature. This simple piece of apparatus is kept cold in the cryostat and is removed to the work bench only during the process of cutting the frozen block. As sections are cut, they are kept cold on the freezing griddle.
Elevated Freezing Block— This steel block is kept cold in the cryostat and in used in conjunction with the freezing griddle. The two broad sides of the block are equipped with feet measuring 3.0 mm on one side and 4.5 mm on the other. The feet create a space between the two steel bars in which the frozen blocks are prepared. Additional elevating bars are supplied to further elevate the block when preparing very thick portion of tissue.
Epoxy Coated Forceps
Putty knife and extra elevating bars Cat #
Description 61706-01 Freezing Griddle/ Elevated Freezing Block Set