This page contains a Flash digital edition of a book.
>> PRICE LIST / TECHNICAL SUPPLEMENT


SBK481 C Sprocket Brake Kit, left side, 48 tooth, chrome caliper


SBK502 P Sprocket Brake Kit, right side, 50 tooth, polished caliper


SBK502 B Sprocket Brake Kit, right side, 50 tooth, black anodized caliper


SBK502 C Sprocket Brake Kit, right side, 50 tooth, chrome caliper


EBR 11.5 Stainless steel brake rotor $749 $699 $725 $749


Kit includes caliper, sprocket/rotor, hardware and weld-on frame tab. Calipers are supplied with a bushing making them suitable for ¾”, 1” or 25mm axle applications. All our sprocket/rotors are supplied with a standard 1.98” center hole. Some wheels have a larger indexing lip on the hub, but there is no ‘standard’ size. We will bore the sprocket/rotor center hole to your requested size for an additional $50. We can bore the center hole as large as 2.5”.


Although designed for use on rigid and Softail applications, we also use Sprocket Brakes successfully with traditional swing- arms on bikes such as Dynas. If you are considering this, then the following information may help. Dimension from outer face of sprocket to outer face of caliper is 1.2”. Caliper measures 2.9” across at it’s widest point, 3.6” at it’s longest point, and is 2.55” from front to back. We are frequently asked whether oil from the chain causes a problem. Firstly, with modern ‘O’-ring chains you cannot lube the joints as they are sealed. You need simply to keep the side-plates clean. Fly-off from the chain is in an outward direction, so contamination only occurs during lubing, if you do lube your chain. If it does, wipe it off. Finally, if some oil makes it onto the braking surface it burns off immediately. In reality, therefore, the contamination issue does not cause a problem. We use RK heavy duty ‘X’ring chains on our bikes; great looks, low maintenance (see page 35).


Our Sprocket Brake Kit uses readily available brake pads and seals. FER Ferodo replacement brake pads


EBC EBC replacement brake pads SBRK Rebuild kit with pads


SR50 Replacement stainless steel Sprocket/ Rotor, 50 tooth


SR48 Replacement stainless steel Sprocket/ Rotor, 48 tooth


ARP Set of 5 custom 12-point ARP stainless steel sprocket mounting bolts - 1", 1½" or 2"


Replacement calipers are available for the price of the complete SBK kit MINUS $299 SBA-S Bolt-on sprocket brake caliper anchor for stock Softails


(1.125” clamp)


SBA-D Bolt-on sprocket brake caliper anchor for stock Dynas


$30 $25 $40


$299 $299 $50 $199


These rotors are machined from high-quality 410 stainless steel, ground flat and parallel and then polished. Rotors are supplied with a standard 1.98” center hole. Some wheels have a larger indexing lip on the hub, but there is no ‘standard’ size. We will bore the sprocket/rotor center hole to your requested size for an additional $50.


EFCP 4-piston front caliper, polished, left EFCB 4-piston front caliper, black anodized, left EFCC 4-piston front caliper, chrome, left


$349 $375 $399


These calipers are direct bolt-on for HD fork sliders, please specify whether 86-99 or 2000-up hole pattern. Some right-side calipers available on request.


Page 20: Oil-tanks


OB13 ‘kickstart’ oilbag, 13” width, 7” diameter, 4.75”x3”x5”deep battery box


OB15 ‘electric start’ oilbag, 15” width, 7” diameter, 5.5”x3.7”x4.7”deep battery box 612089 Oilbag mounting bushings (4) 492700 Outlet fittings, straight (3)


YTX20 Sealed battery YTX20HL-BS -fits OB15 YTX7 Sealed battery YTX7L-BS – fits OB13 AG20 Antigravity 20 cell (5.9”x3.4”x5.2”H)


AG16 Antigravity 16 cell (4.5”x3.4”x5.2”H but powerful enough for stock engine)


OBB5 Brackets to mount OB15 in 00-07 (5-spd) HD Softail


OBB6 Brackets to mount OB15 in 07-up (6-spd) HD Softail


NOTE – OB 15 cannot be used with stock HD 6-speed closed primary drive. OLF-TC Oil Line Fittings (pair) to replace feed & return lines on TC engine


Page 21: Gas-tanks CGK Chopper gas-tank kit CGT Chopper gas-tank fabricated to order


CGT-TC Chopper gas-tank direct bolt-on for Twin Cam Softails (carb or EFI)


LPGC Low profile gas cap $149 $99


Dynas use a right-side (502) sprocket brake kit and run caliper ‘upside-down’ against swing-arm if using part SBA-D.


44


PUGC Pop-up stainless gas-cap with weld-in tank bung


Page 22:


Trojan Fenders: ST


MT LT


Fenders Short Trojan


Medium Trojan Long Trojan


$399 $399 $399


$799 $1199 $1199


Note – on fuel injected bikes CGT-TC must be used in conjunction with HD fuel pump 75268-07E


$449 single $49 pair $99 $199 $599


$699 $25 $20


$125 $125 $369


$299 $99 $99


$49


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52