This page contains a Flash digital edition of a book.
>> PRICE LIST / TECHNICAL SUPPLEMENT >> PARTS PRICE LIST / TECHNICAL SUPPLEMENT


Please call 818 706 1230 to order. A few of our parts are available online, but in most cases we require information from you to ensure your order is correct. Simple questions can be handled by e-mail but detailed enquiries are much easier by phone. DON’T BE SHY – GIVE US A CALL!


Page 13: Rolling Chassis Deal


This deal is not designed to be a ‘bike kit’(see page 38 for Complete Bike Kit info). It is simply a discount given for purchasing a large number of our parts. It represents considerable savings over buying each item individually.


RCD Rolling Chassis Deal: $7,999


For this price you receive the following: 1 Rigid frame with axle. All other options as listed under frames


(see Page 14). Top tube stretch up to 5”, front leg stretch up to 4”, add $200. Top tube stretch over 5”, front leg stretch 4-10”, add $400. For Softail frame with swing-arm etc., add $700. Wiring


tubes add $75. 2 Your choice of Monster rear wheel with tire, single or dual-


flanged (see Page 18). 3 Sprocket Brake Kit OR rotor and sprocket (see Page 19). 4 Neck Bearings and Races (see Page 16). 5 Hidden Fork-stop Kit (see Page 17). 6 Urethane Handlebar Damper Kit (see Page 16). 7 Sani-Tree triple trees (see Page 16). 8 Your choice of genuine HD (Showa) fork tube and slider


assemblies in stock length. Choice of FXST, FLST or FLT styles (see page 16).


9 Flush front axle (see Page 16). 10 Your choice of Monster front wheel with tire, single or


dual-flanged (see Page 18). 11 11.5” front rotor (see Page 19). Two front rotors will only be


supplied if a dual-disc front wheel is selected. 12 Your choice of any two Trojan fenders (see Page 22). 13 Your choice of Exile Forward Controls (see Page 26).


Note: Please Note: There will be no price reduction if only part of the ‘deal’ is required. Please just buy the items individually. This is a fixed price deal. Some customers may save more than others depending on the options selected. This factor was taken into consideration when fixing the price. The pricing above includes the ‘standard’ finish for each part.


Anodizing or powder-coating of parts will incur additional charges. 42 Page 14: Frames


901010 Rigid frame (up to 250) with Cro-moly rear axle with stainless end-caps


901000 Softail frame (up to 250) with swing-arm, bearings, stainless rock-guard, Cro-moly rear axle and pivot axle with stainless end-covers


901048 Wide-tail swing-arm for Daytec Softail frame with bearings, stainless rock-guard, Cro-moly rear axle and pivot axle with stainless end-covers


950028 Wide-tail swing-arm for 2000-2007 HD Softail frame with bearings and Cro-moly ¾” rear axle with stainless end-covers


950029 Wide-tail swing-arm for 2008-up HD Softail frame with bearings and Cro-moly ¾” rear axle with stainless end-covers TRF Trike Rigid Frame TSF Trike Softail Frame


$2,149 $2,849


$1,299 $1,299


$1,299 $4,399 $4,899


TRA TrIke Rear Axle. Includes axles, axle tubes with clamping blocks, differential, billet diff housing, 48T sprocket, brake rotors, brake calipers and caliper brackets. (5 wheel studs on a 4.5” circle allow use of a wide variety of automotive wheels)


Frames can be ordered with a wiring tube in center post and/or top tube


Top tube stretch available up to 5” Top tube stretch over 5” Front leg stretch up to 4”


Front leg stretch 4” to 10” (frame will have a tubular-style top motor mount)


Add $75 Add $200 Add $400 Add $200


Add $400


Each frame is made to order and you may choose any neck rake angle at no extra charge.


Frames are normally supplied with a “Pro-street” style neck, but if you are using a Springer front end or stock HD triple trees, then you should request a stock-style neck. With a stock-style neck the front legs join the neck at the top of the neck tube, with a Pro- street they join at the bottom.


Flat-side gas-tank mounts, regulator mount (strap across the front- legs of the frame) and coil mounts (threaded bungs on center-post of frame) are all available on request.


Softail frames can be ordered with or without passenger peg holes.


Our frames have a ½” offset built in to the motor and transmission plate mounts. You may need an offset transmission plate to further offset the transmission, but the amount of offset will depend on


$5,599


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52