This page contains a Flash digital edition of a book.
STEER TSE PARTS


The Human Machine Interface (HMI) is the central point for visualization, controlling and monitoring the extruder and peripherals through suitable communication links and protocol. With an HMI system, the drive is controlled from the touch screen of the HMI(Multi Panels or PCs with appropriate pointing devices), which operates through Programmable Logic Controllers (PLCs).


STEER allows for customization of the HMI screens, integration of peripherals, other plant utilities and material system to achieve complete plant automation. The software used by STEER is highly reputed (for example, Siemens Pro Tool/Pro and WinCC or equivalent).


The essential features of the Automation system are recipe management, fail-safe interlocking and data-logging. Recipe management allows for storage of all important process parameters for each product. Interlocks are programmed to provide a safe operation and alarms are generated to alert the operator to take corrective actions. Data-logging allows recording of long or short-term trends and reports can be generated on a daily, weekly or monthly basis based on stored production data.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38