This page contains a Flash digital edition of a book.
C. SPRI Single Ply Roofing Industry Standards. 1.4 PERFORMANCE REQUIREMENTS


A. ANSI/SPRI ES-1 or GD-1 tested and certified by a 3rd party testing laboratory active in the testing of industry standard edge metal systems.


1.5 SUBMITTALS A. B.


Submit under provisions of Section 01300.


Product Data: Manufacturer’s data sheets on each product to be used, including: 1. 2. 3.


Preparation instructions and recommendations.


Storage and handling requirements and recommendations. Installation methods.


C. D. E.


Shop Drawings: Show profiles, joining method, location of accessory items, attachment and flashing details, membrane roof interface, and dimensions.


Finish/Color Samples: For each color product specified, two complete sets of color charts representing Manufacturer’s full range of minimum 35 colors and patterns.


Verification Samples: For each color product specified, two sample chips representing actual product, color, and patterns.


F. Manufacturer’s Certificates: Certify products meet specified performance requirements.


1.6 QUALITY ASSURANCE


A. Manufacturer Qualifications: Company certified by Drexel as a “DM-ARM Authorized Fabricator” in manufacturing Edge Metal Products specified in this section.


B. C.


3rd Party QA Certification: “DM-ARM Authorized Fabricator” certified and inspected by 3rd party ANSI/SPRI authorized testing laboratory for quality assurance. Current annual certificate required.


Installer Qualifications: Company certified by Drexel as a “Certified Installer” in the installation of Edge Metal Products specified in this section.


D. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship. 1. 2.


Finish areas designated by Architect.


Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.


3. Refinish mock-up area as required to produce acceptable work.


1.7 DELIVERY, STORAGE, AND HANDLING A. B.


Store products in Manufacturer’s unopened packaging until ready for installation. Store materials in a dry, protected, well-vented area.


C. Remove protective plastic surface film immediately before installation. D.


Store and dispose of solvent-based materials, and materials used with solvent- based materials, in accordance with requirements of local authorities having jurisdiction.


07710-2


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146