This page contains a Flash digital edition of a book.
Exclusion of other Warranties:


This limited warranty is exclusive and is in lieu of any warranty of merchantability, fitness for a particular purpose, or other warranty of quality, whether expressed or implied, and whether written or oral. Corrections of non-conformities in the manner and for the period of time provided herein shall constitute fulfillment of all liabilities of Drexel Metals with respect to or arising out of the goods whether based on contract, negligence, strict liability in tort, or otherwise.


Other Conditions:


This limited warranty does not apply to the following conditions: areas subject to water run-off from lead or copper flashings or areas in metallic contact with lead or copper; areas sheltered from periodic washing by natural rainfall such as underside eaves and soffits; conditions and circumstances where corrosive fumes or condensates are generated or released inside the building; or forming where the bend is tighter than 2T for sheet thicknesses up to 0.030” (0.75mm) and tighter than 4T for sheet thicknesses 0.031” (0.76mm) and thicker; the slope of the roof or sections of the roof being flatter than 1/4; 12; forming which involves severe reverse bending or which subjects the coating to alternate compression and tension; failure to provide free drainage of water, including internal condensation, from overlaps and all other surfaces of the sheets or panels; failure to remove debris from overlaps and all other surfaces of sheets and panels; damage to the coating caused by contact with green or wet lumber; wet storage stain caused by water damage or from condensation; presence of damp insulation or other corrosive materials in contact with or close proximity to sheets or panels; deterioration of sheets or panels caused directly or indirectly by contact with fasteners (The selection of suitable long-lasting fasteners to be used rests solely with the Buyer).


Drexel Metals recommends that there be a systematic fresh water rinse maintenance program in effect in the areas of salt concentration (such as adjacent to the seashore and/or industrial atmospheres) so as to prevent the accumulation of concentrated mineral deposits.


Stipulations and Limitations for Remedy


Drexel Metals Inc.’s liability for breach of this warranty shall be limited exclusively to the cost of either repairing non-conforming sheets or panels or, at Drexel Metals Inc.’s sole option, of furnishing F.O.B. Buyer’s plant, sufficient sheet product to enable Buyer to fabricate replacement panels for the non conforming panels.


1. Drexel Metals Inc. shall not in any event be liable for the cost of labor expended by others on any non-conforming sheets or panels or for any special, indirect or consequential damages to anyone by reason of the fact that such sheets or panels shall have been non- conforming.


2. Claims must be promptly reported in writing to Drexel Metals Inc. and Drexel Metals Inc. shall be given a reasonable opportunity to inspect the sheets or panels claimed to be non-conforming. Adequate identification of the material involved in the claim, includ- ing the date of installation, order number, coil number, invoice number and date of shipment must be established by the Buyer.


3. Buyer shall exercise diligence in the inspection of material as received from Drexel Metals Inc. so as to mitigate repair or replacement.


4. Drexel Metals Inc. extends this warranty solely to the owner. This warranty is non-transferable and non-assignable.


5. Drexel Metals Inc. reserves the right to terminate this warranty at any time (except as to orders already accepted) upon giving of written notice thereof.


6. This Warranty becomes effective only upon presentation of paid invoices from contractor/owner to manufacturer/installer and to Drexel Metals Inc.. In no event will future claims be honored if the above payments have not been made.


This is our complete warranty. The laws of the State of Kentucky, USA, hereunder shall govern the rights and obligations of the parties. Any controversy or claim arising out of or relating to this contract shall be determined by arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The place of arbitration shall be Louisville, KY USA. The language of the arbitration shall be English. Drexel Metals Inc. makes no guarantees, either expressed or implied beyond the fact hereof; including, with limitation, warranties of fitness and merchantability and shall have no other liability with respect thereto. Drexel Metals Inc.


Brian Partyka Partner


Date:


Louisville – Baltimore – Tampa – Denver – Philadelphia Phone – 888.321.9630 - www.drexelmetals.com


2


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146