This page contains a Flash digital edition of a book.
Which ventilation system is right for your home?


With today’s houses becoming more air tight, quality ventilation systems are even more important. What’s new on the market that satisfies energy efficiency requirements yet ensures good air quality for modern homes? Kevin Hippey, general manager Vortice Ltd, explores the options


are becoming increasingly airtight. An energy efficient home is laudable and potentially much kinder on the wallet, but the quality of the air that the occupant breathes is vital to their health and well-being. Rather than being an ‘also ran’ element of the build process, the design of the ventilation system can make an enormous differ- ence not only to the quality of the air, but also to how energy efficient that system will be. In every case, in order to get the optimum perform- ance from today’s ventilation products, the way the ductwork is designed is key. If the self builder can ensure three things are


T


given prominence when planning their ventilation system, they can make an enormous difference both to air quality and to the energy efficiency of their ventilation system.


• The first is to ensure that system restrictions like bends in ductwork are avoided – you will quickly negate the benefit of an energy effi- cient ventilation fan if the air it is moving has to navigate around corners and work much harder to move through the ductwork.


• The second is to choose the right ventilation product for your requirements and generally that means knowing precisely how many ‘wet rooms’ there are around the property or antic- ipating how many there might be in the future and specifying the fan or heat recovery sys- tem that’s up to the job.


• The third is not to scrimp on quality of the ducting – it does come in a range of prices – if you’re shopping around, don’t be per- suaded to buy low-grade ducting that’s been developed from the tumble dryer market – it won’t be up to the job for very long, will degrade or split and end up costing you more than you’d bargained for.


There are new building regulations coming


into force this year, but these don’t affect the self build or renovation market, the only impact they will have is if you’re building a Code property. So, what products are out there? The buzz


words of the moment are heat recovery units – these special ventilation systems take stale air from the wet rooms of the building, remove the heat from the air and replace that heat into the fresh air that it brings back into the building from outside. These products are often mis-sold to owners of old buildings, where in most cases, unless a thermal covering has been applied, heat loss through the envelope of the building will cancel out the benefit of having a heat recovery unit in the property. There is one excep- tion to that, where the purpose of the unit is not really to recover heat so much as to significantly improve a very damp property. Heat recovery units come in different shapes


and sizes and are usually selected based on the number of wet rooms they need to extract from – a wet room is a bathroom, WC or utility room for example. They can be designed to fit within a roof space, a kitchen cupboard space or, where space is at a premium, some of the newer units are designed specifically for ceiling voids in apartments. Continuous extract fans can be more appro-


priate for refurbishments and run continuously to ensure fresh airflow through the property at all times. In older properties, a continuous running


fan will help reduce condensation and if it were a low energy product, then the cost would be less than the equivalent of having a 60 watt light bulb on. For self builders, if you’re appointing a con-


tractor to install the ventilation system, make sure they are BPEC trained – that means that they can ensure both the ducting and the venti- lation system are designed to work to their opti- mum capacity. Many reputable ventilation system suppliers


offer a design service at a cost which is refund- able against a product order – this is well worth the investment and can ensure that energy savings are made right from the word go. Often, the technical departments of manu- facturers can also give you indicative prices for a two-, three- or four-bedroom house so that you have a guideline to budget from and in our case, products are all priced on our e-commerce website. The important thing to remember, whether


you’re building from scratch or renovating an older property, is that the time you take design- ing the system in the first place will reap benefits in the longer term, not just for your pocket, but also for your health.


Enq. 136 selfbuilder & homemaker www.sbhonline.co.uk 29


rends in modern house building are clear to all; energy efficiency is king and in striv- ing to achieve that with new builds, houses


A DIAGRAM OF HOW A HEAT RECOVERY SYSTEM WORKS IN A HOUSE


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68