This page contains a Flash digital edition of a book.
SPECIALIST TOOLS


ENERGISING THE WIND INDUSTRY


Increased complexities require a system-level approach in designing and evaluating wind turbines


Wind energy projects around the globe — from small installations to very large wind farms — have a common goal in reducing unit energy cost while improving reliability.


BUSINESS PERSPECTIVE


From a business perspective, technology contributes to viability by influencing efficient wind turbine design, manufacture, deployment and operation. Whether the application is an onshore, offshore or far-shore installation, advancements in science and engineering will contribute to


MORE COMPLEX TURBINES Wind turbines and wind energy projects are becoming increasingly more complex, so they must operate dependably at levels unimaginable a few years ago.


Installations of very large wind turbines in offshore and floating configurations are a major technological achievement. Energy companies hope to design, install, and efficiently and reliably operate superstructures whose wind blade spans are over 50 metres and subject to wave and wind loading at different angles of attack.


HISTORY


Historically, wind energy companies have used engineering simulation software as a point solution, used only to simulate a specific design aspect or analyse a component.


Successful application of ANSYS solutions ranges across the wind energy industry, including….


• Aerodynamic design – thrust coefficient, blade structural integrity, ultimate loads and fatigue, noise predication, wind gust fluid–structure interaction, bird strike, icing, boundary layer transition, near- wake and far-field studies


• Structural design – lower and rotor structural integrity/safety, power conversion efficiency, installation cost and maintenance, offshore transport and installation


• Component design – blades, gearboxes and bearings, generators, nacelles, rotors, drivers, motors, electronics cooling


• Site selection and farm layout – maximum project potential, power output (both peak and average), wind loads, fatigue


• Turbine placement – variable terrain, roughness, forestry, multiple wake effects, buildings and setbacks


• Electromechanical system – electrical machines, variable-speed control systems, transformers, power electronics, power distribution, sensor and actuator design


• Blade manufacturing


SYSTEM - LEVEL APPROACH Today’s increased complexities require a system-level approach in designing wind turbines and evaluating performance based on real-world conditions.


the industry’s success, especially through capabilities related to aerodynamic design, material science, structural design, electronic mechanical control, site selection and farm layout.


Advances in engineering simulation software increasingly make this possible because:


• Modern simulation software is designed with capabilities that enable modelling entire wind turbine systems


• Its value is further enhanced through advanced solver functionality including turbulence transition models, advanced contact models, multiphysics capabilities, composites tools, high- performance computing and the flexibility to connect to third-party software for wind turbine blade manufacturing or aero-elasticity calculations.


• Engineers can perform electromechanical system-level analysis, electromagnetic analysis on electric machines and drives, wind power analysis, and stress and modal analysis.


HIGH-LEVEL INTEGRATION AND ADVANCED CAPABILITIES By leveraging high-level integration and advanced capabilities engineers over time are extending their once-simplified simulations to include additional details in overall wind turbine design - enabling small efficiency gains, important in an industry in which a minute efficiency/performance gain can translate into much larger electricity production, reduced downtime and greater project profitability.


GREATER RELIABILITY WHICH ENABLES BETTER WIND ENERGY PROJECT OPERATION


Such details can also improve reliability and enable better wind energy project operation. Already, there are many exciting examples of the expanding use of engineering simulation throughout the wind energy supply chain.


ADDITIONAL COMPLEXITIES With increased demand for wind energy, engineers will face additional complexities, such as even-larger turbine blades that will be installed farther offshore and in harsher environments.


Wind farm site selection must continue to reduce risk and overcome proximity and environmental concerns. New powertrains, lighter towers, multi-access turbines, floating platforms and quieter machines will be developed. The industry will innovate to meet the challenges of increased safety and reliability, improved remote monitoring, reduced system maintenance and regulatory concerns.


KEEPING PACE


ANSYS is keeping pace by providing high- fidelity integrated, advanced capabilities that meet single-physics needs as well as system-level and multi-disciplinary requirements of the wind energy industry.


Ahmad Haidari ANSYS Inc


www.ansys.com www.windenergynetwork.co.uk 103


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116