This page contains a Flash digital edition of a book.
Blast and jetting hoses BLASTING HOSES


section twelve WATER AND SEWER JETTING HOSES


EF301 Thermoplastic Sewer Jetting Hoses Application


Widely used for clearing sewers at 175bar. The product has a special fully bonded construction with optimum cut and wear resistance. The cover is resistant to microbiological degradation. Very hard wearing. Light when compared to rubber sewer cleaning types.. Standard lengths are 100 and 120 metre coils. Custom lengths are available to order Specification Inner tube


Thermoplastic elastomer.


Reinforcement EF301 single or double braid of synthetic fibre.


Cover Orange colour, polyurethane.


Temperature -40º C to + 60ºC standard Special colours, and marking available to order.


Range EF301-8.


Standards Abrasion loss of the tube, in accord with DIN 53516.


Application Abrasion resistant soft wall hose,used for the delivery of sand and cast steel shot. Manufactured with an anti static rubber compound.


Temperature From -40ºC (-40ºF) to +70ºC (+158ºF).


Construction Tube


Cover


1/2in bore OD 20.6mm 1/2 BSP(F) 175bar MWP part number EF301- 8/100/B8MF for 100m assembly


Black smooth, anti static SBR/NR rubber, abrasion resistant. Reinforcement, high strength synthetic cord


Black smooth, (wrapped finish) anti static SBR/NR rubber, abrasion resistant


Branding Exitflex Marking Continuous in bordeaux colour stripe.


Hose connections 75-3182 1 x 7/8in OD hose coupling


75-3181 1 x 1/2in OD hose coupling 75-G182 1 x 7/8in coupling gasket 75-G181 1 x 1/2in coupling gasket


EF301-12 3/4in bore OD 29.2m 3/4 BSP(F) 175bar MWP.part number EF301- 12/100/B12MF for 100m assembly


EF301-16 1in bore OD 36.8mm 1inBSP(F) 175bar MWP part number EF301- 16/100/B16MF for 100m assembly.


EF301-20 11/4in bore.OD 45.7mm 11/4 BSP(F) 175bar MWP part number EF301- 20/100/B20MF for 100m assembly


We would welcome your enquiries for the other pressure ranges - 193bar (2800psi), 210bar (3000psi) and 280bar (4000psi).


EF154 Rubber Double Reinforced Wash Hose


Application High pressure assemblies for 276bar maximum working pressure. Suitable for water cleaning water and oil based fluids and is widely used in agriculture and engineering environments. Compact OD with excellent abrasion resistance.


Specification and application standards Inner tube Water & oil resistant synthetic rubber Reinforcement Dual steel wire braids Cover.


Black synthetic rubber, resistant to oil, water, weather and abrasion


Temperature -40º C to + 100º C.standard 120º C.Intermittent


Bore 1/2in bore


OD 22mm MWP


276bar MWP


Burst pressure 1104bar minimum Bend radius 130mm minimum Standards EN-853-25N Exceeds SAE 100 R2.


Part numbers


EF154-8/100/B8 MF EF154-8/100/B8 FF


Other custom lengths are available


Part number Hose ID


ESB 25-7 1 25 ESB 32-8 1.25 32


in mm in mm bar psi 1.53 39 1.88 48


Hose OD Working pressure


12 174 12 174


burst pressure


bar psi kg/m lb/ft m 36 520 36 520


0.80 0.54 1.10 0.74


weight


Coil length


40 40


138


www.exitflex.co.uk


www.exitflex.co.uk


139


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75