This page contains a Flash digital edition of a book.
Pressure feed equipment Pressure Feed Containers


We are pleased to offer a well finished, robustly constructed, selection of pressure feed containers. These are produced from excellent quality materials and fitted with quality components. The design provides reliable performance for demanding industrial duty. The products are CE marked and are provided with test


certificates. They are available with or without agitators and the alternatives of manual or automatic agitators can be found within the range of models.


Model range Model Capacity


EPT-4 4 litre


EPT-10 10 litre EPT-10M 10 litre EPT-10A 10 litre EPT-10B 10 litre EPT-20M 20 litre EPT-20A 20 litre EPT-40M 40 litre EPT-40A 40 litre


Other sizes by enquiry. EPT 2. 5 Pressure Cup


Agitator None None


Outlet Top Top


Manual Top Automatic Top None


Bottom


Manual Top Automatic Top Manual Top Automatic Top


This 2.5 litre stainless steel pressure cup is an ideal size to allow the spraying of smaller quantity of materials. A suction or gravity spray gun holds a much smaller quantity and it wastes time and can affect finish by repeat filling and mixing. The range of materials that can be handled is also more flexible.


• Quick release clamp lid, saves time and avoids sticking lid problems


• Carry handle, hook • Lid mounted pressure release valve


• Greater manoeuverability compared with cup guns


Spare parts PTP-103


PTP-118 PTP123


PTP-119/34 PTP-220/34 PTP-240/34 PTP-112 PTP-126


98


10 litre lid gasket 20 litre lid gasket 40 litre lid gasket


10 litre stainless liner 20 litre stainless liner 40 litre stainless liner


10/20 litre pressure gauge 10/20 litre pressure regulator


• 4 bar maximum working pressure • Built in air regulator • All stainless steel wetted • 3/8BSP(M) fluid connection


• 1/4BSP(M) air connection Part numbers EPT 2.5


Cup assembly (no hoses) EPT 2.5K Cup assembly with 1.25m hose set


Air atomising spray extensions and equipment


The Exitflex 38 series conventional low pressure internal spraying equipment was designed to be a simple, needleless, and an easy to operate method of applying coatings such as wax or paint to internal surfaces. The design was to apply a coating rather than a fine finish. The system requires the coating to be pressure fed to the atomisers which are of internal mix design. In general, the equipment functions correctly with equal fluid and air pressures, ie 1bar fluid and 1 bar air pressure. Most coatings atomise well in the 1-4 bar range. Keep the set pressures equal. Fine adjustment can be made as required. Too much fluid pressure and the coating will be forced into the air passages, too little or too much air pressure and the system will not operate. The system requires dual regulation ie air and fluid pressures need to be regulated individually. When the equipment is set up correctly then the user will achieve the proper function.


The system operates with most coatings, however it should be noted that coatings with sand or fibrous fillers are not suitable. The atomisers are rotary with a choice of side only or forward side and rear spray. A simple fixed atomiser is also available. These are not designed for use with Airless systems. Air is required to generate rotation.


Some air assisted airless


versions are available There is a select programme of fogging chambers for use with popular spray guns from major manufacturers.


Flexible Extensions PA131J230


Flexilance 1 metre including 38-230 fixed atomiser (excl. fogging chamber)


Flexible extensions are available using the 38-219 or 220 spinning atomiser with 1/4in bore nylon hose.


Slimline Extensions Extension component range 38-220 38-002 38-230


38-442 38-452 38-411


Fogging chamber to fit BRPHVLP gun Fogging chamber to fit Iwata W200


Fogging chamber to fit DeVilbiss, Sagola (not HVLP)


38-411/HD Fogging chamber to fit DeVilbiss JGA/HD


38-438 38-471 38-471-1


74-021 38-002 38-210 38-220 38-230


32-306/16 32-312/16 32-318/16 32-324/16 32-336/16


Fogging chamber to fit DeVilbiss, Compact Gun


Fogging Chamber AAA fit Graco Alpha plus, AAG 2000


Fogging chamber, AAA. fit Graco G40


Coupling 1/2 JIC(M) x (M)


Adaptor 1/2 JIC(M) 1/4in UNF(F) Spinning atomiser foward, side, back Spinning atomiser, side sprayonly Fixed atomiser, for flexi lance Lance 6in length - rigid Lance 12in length- rigid Lance 18in length- rigid Lance 24in length- rigid Lance 36in length- rigid


To assemble a complete lance for gun mounting select:- 1 fogging chamber to suit the gun you have, or purchase 1 TLPF gun, 1 Lance,(length to suit), 1 x 32-002 adaptor, 1 atomiser to your choice


PA131J230


An AAA fogging chamber must have a pre orifice, size to suit. These systems require pressure feed.


section eight


38-501


Slimline angled fixed fan atomiser complete with fogging chamber to suit and choice of 6in, 12ln or 18in length, 11mm OD


www.exitflex.co.uk


Standard 12in extension for DeVilbless JGA/GTI spray gun with forward, backward and side spray 360º atomiser nozzle


www.exitflex.co.uk 99


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75