This page contains a Flash digital edition of a book.
Air fed breathing and control equipment


AVENGER AIR FED VISOR Protect your operator with this highly efficient, easy to use, breathing equipment.


Super quality, this British manufactured visor is designed for operator protection when painting. The new Avenger air fed visor is light and features a large clear view acetate screen for great visibility with a comfortable fabric face seal and an effective chin guard.


An air Flowmeter is built in to the air supply diffuser on the inside left side of the visor. This enables the operator to see the air flow indicator and get visual confirmation that air is flowing correctly. This added safety feature ensures that the wearer is made aware should any air supply problem develop. The filter and pre set air regulator on the belt have further safety features including an indicator gauge to show air flow condition, also a colour changing activated carbon filter to show you when the filter needs attention. The Avenger visor comes complete with a fabric head shroud to protect the wearer from paint overspray. A removable visor cover for easy cleaning is also supplied. The Avenger system protects the eyes, lungs and face from solvent and airborne contamination. It is possible to become sensitised by isocyanates, so avoid the risk, it is recommended that a visor is used at all times.


Portable and wall mounted filtration systems are available for use with the Avenger visor. These provide further protection for spray duty.


Part numbers


Outfits 50-511-1


50-611-1 50-612-1 Air fed visor only


50-513 Waisbelt with filter, regulator and flow indicator gauge


Air fed outfit comprises 50-511-1 plus 50-513


Air fed outfit comprises 50-611-1 plus 50-413-K10, 50-406 gun hose and 50-505, 10 metre air supply hose


Spare parts 50-404


50-406


50-423 50-505


50-507


50-302 50-303 50-304


Odour removal cartridge for 50-513


4ft Gun air supply hosecomplete with Y and 1/4 BSP QD connection and 1/4 BSP(F) stem


Flow indicator gauge.


10 metre air supply hose complete with1/2 BSP(M) QD, Y connector and 1/4 BSP QD and stem


Y Connector 1/4 BSP(F)


50-301-K5 Hygene kit pack of 5 brow bands, and textile face seals


Fabric head shroud Replacement screen for 50-511-1


Replacement visor air supply tube for 50-511-1


50-305-K10 Visor covers pack of 10


section four


System performance and general description


Air supply pressure maximum 10bar (145psi) minimum 4bar (60psi)


Mask air supply rate* maximum 232 l/min minimum 160 l/min


Hose length


maximum 15m (supply to regulator)


Environmental working temperature 1.5 to 50ºC Filter life


400 operating hours - nominal


*When used with with a spray gun needs 620 l/min at 90psi


58 www.exitflex.co.uk


Materials Browband polypropylene Head harness nylon Visor acetate Press studs Skirt


Hose PVC Hose fittings


brass/nickel


nickel plated brass


woven elastic on polycarbinate carrier


50-611-1 Avenger Air Fed Visor


Air fed visor outfit complete with belt, pre set regulator and odour removal cartridge, including fabric head shroud and spare acetate visor cover.


www.exitflex.co.uk 59


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75