This page contains a Flash digital edition of a book.
Swivels and Y blocks


HIGH PRESSURE STAINLESS STEEL SWIVELS


550bar


The Exitflex ‘Zwivel’ is a precision engineered device with innovative seal design. It is a three axis swivel for use with high pressure spray guns and extrusion devices for sealing applications. The device weighs less than 100 grams with a maximum working pressure of 550bar. The Zwivel will operate from low pressure successfully up


to its maximum pressure. Because of it’s low weight it has a very high operator acceptance rate. It makes gun movement relatively easy in difficult to access areas


79-101/34


1/4 NPSM(M) x 1/4NPSM(F) 1bar to 550bar 79-102/34


1/4BSP(M) x 1/4BSP(F) 1 bar to 550bar


High Pressure Stainless Steel Micro Swivel 550bar


The Exitflex micro swivels are high performance, single axis, swivels with a maximum working pressure of 517bar. The items are small at 31mm long and weighing in at 30 grams each. They deliver a very high performance with a low weight


addition to the gun thus reducing operator fatigue. They perform a wide range of applications from paint spray to vibration control.


79-001/34-K5


1/4NPSM(M) x 1/4NPSM(F) 1bar to 550bar. 79-002/34-K5


1/4BSP(M) x 1/4BSP x 1/4BSP(F) 1 bar to 550bar.


70 series High Pressure Swivels 517bar This well known range of Exitflex swivels can be found throughout the spray painting world. Designed for ease of use, long service and reliable performance it has been adopted by famous OEM equipment


70-110/ 2 1/4BSP(F) x 1/4BSP(M) MWP517bar 70-220/ 2 1/4NPS(F) x 1/4NPM MWP517bar 70-220/34 1/4NPS(F) x 1/4NPM s/steel MWP517bar 70-290/1 1/4NPSM(M) x M14x1(M) MWP517bar 70-440/2 3/8BSP(M) x 3/8BSP(F) MWP517bar 70-550/2 3/8 NPSM(M) x 3/8 NPSM(F) MWP517bar 70-520/2 3/8 NPSM(M) x 1/4NPSM(F) MWP517bar 70-900/1 1/4NPSM(M) x M18x1.5(M) MWP517bar


HIGH PRESSURE RECIRCULATION Y BLOCKS 400bar MWP


Stainless steel recirculation Y blocks are designed for recirculation of paints when hot spray systems or recirculation is required in the fluid lines. They are low weight, built in 304 stainless steel and are pressure rated at 400bar maximum working pressure. Standard models are as listed. (Do not use low pressure Y blocks which will be seen in a later section of this brochure.)


74-811/30 2 inlets 1/4BSP(M) x 1 outlet 1/4BSP(F). 74-822/30 2 inlets 1/4NPSM (M) x 1 outlet 1/4NPSM(F) 74-855/30


2 inlets 3/8 NPSM(M) x 1 outlet 3/8 NPSM(F) 74-888/30


2 inlets M16 x 1.5(M) x 1 outlet M16x1.5(F) 30 www.exitflex.co.uk www.exitflex.co.uk 31


suppliers for use with their own equipment ranges. The 70 series swivels are designed for 517bar MWP and are available in the following range of popular sizes. Carbon steel is the standard range with a stainless steel option for the NPS model.


Couplings and adaptors


PLEASE NOTE Where stated swivel nut these are not high-pressure swivels. Where a high pressure swivel is required order a 70 or 79 series item - see page 28. All swivel nuts in this section do not swivel once tightened down. MWP 500bar unless otherwise stated.


BSP Male x BSP Male 74-001/1


74-001/30 74-002/1 74-002/30 74-003/1 74-003/30 74-004/1 74-004/30 74-005/1 74-005/30


1/4 BSP(M) x 1/4 BSP(M)


1/4 BSP(M) x 1/4 BSP(M) stainless 1/4 BSP(M) x 3/8 BSP(M)


1/4 BSP(M) x 3/8 BSP(M) stainless 3/8 BSP(M) x 3/8 BSP(M)


3/8 BSP(M) x 3/8 BSP(M) stainless 3/8 BSP(M) x 1/2 BSP(M)


3/8 BSP(M) x 1/2 BSP(M) stainless 1/2 BSP(M) x 1/2 BSP(M)


1/2 BSP(M) x 1/2 BSP(M) stainless


NPSM/NPT Male x NPSM/NPT Male 74-010/1


74-011/1 74-011/30 74-012/1 74-012/30 74-013/1 74-013/30 74-014/1 74-015/1


1/4 NPT(M) short x 3/8 NPT(M) W 1/4 NPT(M) x 1/4 NPT(M)


1/4 NPT(M) x 1/4 NPT(M) stainless 1/4 NPT(M) x 3/8 NPT(M)


1/4 NPT(M) x 3/8 NPT(M) stainless 3/8 NPT(M) x 3/8 NPT(M)


3/8 NPT(M) x 3/8 NPT(M) stainless 3/8 NPT(M) x 1/2 NPT(M) 1/2 NPT(M) x 1/2 NPT(M)


NPSM/NPT Male x BSP/BSPT Male 74-062/1


74-063/1


JIC Male x JIC Male 74-021/1


1/4 NPT(M) x 1/4 BSP(M) 3/8 NPT(M) x 1/4 BSP (M)


JIC 1/2 x 20(M) x JIC 1/2 x 20(M)


Metric Male x metric Male 74-031/1


Metric Male x BSP Male 74-060/1


M16 x 150(M) x M16 x 150(M) M16 x 150(M) x 1/4 BSP(M)


Metric Male x NPSM/NPT Male 74-061/1


74-064/1 74-070/1


M16 x 150(M) x 1/4 NPT(M) M16 x 150(M) x 3/8 NPT(M)


M16 x 150(M) x M16 x 150(F) swivel nut


section two


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75