This page contains a Flash digital edition of a book.
Spray tip programme ORIFICE SIZE


10 20 30


inch mm 2/3 4/6 0.006 0.15 0.007 0.18 0.008 0.20 0.009 0.23 0.010 0.25 0.011 0.28 0.012 0.30 0.013 0.33 0.014 0.35 0.015 0.38 0.016 0.40 0.017 0.43 0.018 0.45 0.019 0.48 0.020 0.50 0.021 0.53 0.022 0.55 0.023 0.58 0.024 0.60 0.025 0.63 0.027 0.68 0.029 0.73 0.31 0.78 0.033 0.84 0.035 0.89 0.037 0.94 0.039 0.99 0.041 1.04 0.043 1.09 0.045 1.14 0.047 1.19 0.049 1.24 0.051 1.29 0.053 1.35 0.055 1.40 0.057 1.45 0.059 1.50 0.061 1.55


16


section one


SPRAY ANGLES IN DEGREES AND WIDTH IN INCHES 40


50 60 70 80 90 100 110 6/8 8/10 10/12 12/14 14/16 16/1 18/20 20/22 22/24


0.14 0.18 0.22 0.25 0.33


0.040 0.047 0.060 0.066 0.09


0.37 0.087 0.47


0.13


0.57 0.15 0.65


0.72 0.19 0.91


0.98 0.26 1.10


1.30 0.34 1.40


1.52 0.40 1.65


1.83 0.48 1.95 2.13


SPEEDY AND CONTRACTOR TIPS 0.18 0.24 0.29 0.37 0.45


0.54 0.56


2.50 0.660 2.95 0.78 3.42 0.90 3.80 1.00 4.30 1.14 5.10 1.34 5.50


1.45


6.15 1.62 6.80 1.79 7.40 1.95 7.94 2.09 8.50 2.25 9.10 2.40 9.80 2.60 11.00 2.90 11.80


3.10


12.50 3.30 13.70


3.60 www.exitflex.co.uk www.exitflex.co.uk 17


Spray angles quoted are as manufactured and tested on water. Spray widths can vary and depend upon viscosity, solids content and pressure employed. The figures quoted are as a guide only.


Other sizes may be possible by special enquiry.. Please enquire.


The following size ranges are suggested for the materials listed.


Stains and lacquers Oil based paints Latex emulsions


0.006in to 0.013in 0.013in to 0.015in 0.017in to 0.021in


Heavy paints, latex & intumescents 0.023in to 0.029in Block fillers, textures & epoxies 0.029in to 0.061in


When selecting a tip size the paint manufacturer will often suggest suitable sizes in their data sheets.


TRIA ‘Pro45’ TIP PROGRAMME Stock size range for 45-510 Premium Standard Tips is:- from 0.009 to 0.015in. Other sizes to order.


‘Pro45’ Superfine Tips 45-519 are all sizes to order. TRIA ‘Pro45’ PREMIUM STANDARD TIPS


FLOW RATE WATER 100bar (1500psi) L/min


GPM NOTES COLOUR BARS INDICATE TIP RANGE AS FOLLOWS INDUSTRIAL AND AAA TIPS


SUPERFINE TIPS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75