This page contains a Flash digital edition of a book.
PUMPS &FILTRATION


VANE PUMPS PROVIDE SMOOTH, CONSISTENT LEAK-FREE PUMPING


Pump specialists MICHAEL SMITH ENGINEERS have


recently added anew range of magnetically coupled Vane Pumps which further expands the extensive choice of pumps and pumping systems they offer.


The MPumps series of vane pumps provide


the important benefits of sealless, safe leak- free pumping and are available in plastic (Polypropylene and PVDF) and stainless steel wet end construction.


They also offer stainless steel multistage


configurations for higher differential


pressure applications.


In addition to their sealless, mag- drive design, MPumps three series of vane pumps are noted for their smooth, pulse-less, constantly accurate output, along with their ability to handle thin liquids at relatively high pressures. They are self-priming and some models can run dry for short periods. They are also able to compensate for wear through vane extension and have good suction lift capabilities. All MPumps are designed for close-coupling to the motor which minimises the space footprint needed.


The pump illustrated is anew design which features apolypropylene pump head housed in asteel casing and is capable of withstanding system pressures up to 15 Bar.Itisdesigned for pumping water at 6lit/min at adifferential head of 17 metres. This pump provides the assurance of no leakage thanks to its magnet coupling, smooth, pulseless flows and the capability to withstand high system pressures.


In terms of overall performance for the 3Series of pumps, the plastic pumps are capable of capacities up to 3000 lit/hr,discharge pressures to 6Bar and viscosities up to 10000 cP.The stainless steel versions have similar output and viscosity handling capacities, but higher discharge pressures to 14 Bar while the Multi- stage versions provide capacities up to 3000 lit/hr, discharge pressures to 25 Bar and viscosities to 10000 cP.


44 SURFACEWORLD april 2013 read online @www.surfaceworld.com


Further details on the range of MPumps are available from:


Michael Smith Engineers Ltd, Oaks Road, Woking,Surrey,GU21 6PH,UK


Find out more at: http://www.michael-smith-engineers.co.uk/ products/vane-pumps/vanepumps-products.htm


Tel: FREEPHONE 0800 316 7891 Email: Info@michael-smith-engineers.co.uk www.michael-smith-engineers.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76
Produced with Yudu - www.yudu.com