This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
TwinTube™: One easy-to-use quick disconnect for two separate non-valved flow paths. Material: Acetal, ABS Tubing ID Sizes: 1/16” to 1/8” (1.6mm to 3.2mm)
SixTube™: Snap-in panel mount design and flexibility to connect and disconnect six separate lines with or without valves. Material: Acetal, polypropylene Tubing ID Sizes: 1/16” to 1/8” (1.6mm to 3.2mm)
TenTube™: Allows connection and disconnection of up to ten lines with one slide latch; tubing orientation ensured by physical keying. Material: Acetal, polypropylene Tubing ID Sizes: 1/16” to 1/8” (1.6mm to 3.2mm)
Multi-Mount: Connects three to five lines at once; keyed to prevent mismatched connections. Material: Acetal, chrome-plated brass Tubing ID Sizes: 1/8” to 3/8” (3.2mm to 9.5mm)
2.046 Not to scale
Puncture Seal: Provides closed connection to Hedwin Cubitainer®
bag-in-box container systems.
Material: Polypropylene (coupling) and polyethylene (cap) Tubing ID Sizes: 1/4” to 3/8” (6.4mm to 9.5mm)
UDC: Provides closed connection to bag-in-box packaging with 8mm threaded necks. Material: Polypropylene (coupling) and acetal (cap) Tubing ID Sizes: 1/4” to 3/8” (6.4mm to 9.5mm)
2.048 Tube Fittings 2.052 Fittings and Accessories 2.004