This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
The pedals can be supplied in either the pneumatic or electrical foot operated version. The pneumatic type is available with a 5/2 valve and 1/4” front ports, which allow the fittings and silencers to be assembled conveniently on the front face. A 3/2 operation can be obtained by closing an outlet port. The electrical type is available with a single-pole changeover contact microswitch and a front wire outlet (PG9). The pedal can be operated as bistable or monostable, by switching the selector placed under the small red protection flap.
SPECIFICATIONS - PNEUMATICALLY OPERATED Type of construction Valve function Materials
Spool type 5/2 way position
Valve body AL. Stainless steel spool. NBR seals. Plastic casing
Operating temperature Operating pressure Rated flow Ports
Valve built into pedal body
0°C to +50°C (with dry air -10°C) 2.5 to 8 bar 650 Nl/min 1/4” gas
SPECIFICATIONS - ELECTRICALLY OPERATED Type of construction Valve function Assembly Cable entry
Single-pole changeover contact microswitch (NC) Normally Closed / (NO) Normally Open Microswitch built into the pedal body 0°C to +50°C (with dry air -10°C) 0°C to +50°C