This content requires Adobe Flash Player version
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FILTER, REGULATOR AND LUBRICATOR ASSEMBLY MC SERIES
DESCRIPTION The metal bowls of these filters come complete with a transparent sight glass and have a condensate drain valve. The standard regulator has a relieving diaphragm. The oil flow of the lubricator can be monitored via the small transparent cap and regulated by means of the special adjusting screw.
Materials Operating temperature
Compact modular with filtering element in HDPE
Zama, NBR, Technopolymer 0°C to 50°C at 10 bar
Porosity of filtering element 25 µm standard - 5 µm upon request Draining of condensate Finishing Oil refilling
Manual - semi-automatic standard Enamelled
Without pressure (G1/4); normal also during use (G3/8 - G1/2)
Oil for lubrication Inlet pressure
3°E - 10°E (ask our engineers for types)
standard drain 0.3 - 16 bar protected depressurisation 0.3 - 16 bar depressurisation 0.3 - 10 bar automatic drain 1.5 - 15 bar for G3/8 & G1/2