SPACESAVER ROTARY STORAGE SYSTEMS ADDER UNIT
Once a Starter Unit is in place, adding more capacity could not be simpler…it's called an
Adder Unit. The number of units that you add is only limited by the physical restraints of the office design or the capacity that you require.
Adder units bolt immediately to any unit, no drilling is required.
As you can see from the 3D illustration, Adder Units always connect to another unit as the Adder Unit is not self-sufficient. However, at any time in the future an Adder Unit can be converted to a Starter with the purchase of a Conversion Kit. Adder Units share rotation space with the Starter Unit, and as a result, adjacent units cannot be rotated at the same time.
Shown in E configuration
Tech Data : Depth. The depth dimension in the part number does not include the rotation space clearance required behind any Rotary Storage Unit. For Letter-Size purposes the rotation space is slightly less that six inches, for Legal-Size the space is slightly more than seven inches.
The 3D illustration shows the Spacesaver Rotary Storage in the “E” or empty configuration. This way the interiors can be customized for your specific needs. The accessories shown in this guide are our most popular. Please do not hesitate to contact Spacesaver for availability of additional accessories. The entire part number for this example is PFA302576E and breaks down as follows:
PF Designates Spacesaver Rotary Storage A Designates an Adder Unit 30 Designates the width, actual width of letter size Adder Unit is 30.75”
25 Designates the depth, see Tech Data on depth at left
76 Designates the overall height, actual height of 6 Plus unit is 76.625”
E Designates the interior is Empty
6
www.southwestsolutions.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28